1. Manuals
  2. Brands
  3. T3 Motion Manuals
  4. Measuring Instruments
  5. MotionTrak 330 4CH
  6. User manual

T3 Motion MotionTrak 330 4CH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing this Drive Recorder.
Before using the Drive Recorder, please ensure that you
read and understand this USER GUIDE.
Please store this USER GUIDE in an easily accessible location.
Before connecting and installing this Drive Recorder, please
Before connecting and installing this Drive Recorder please
refer to the appropriate instruction manual for proper operation.
USER GUIDE
USER GUIDE
4CH
VER 2.1.0
nd
2 Edition
2
Edition

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MotionTrak 330 4CH and is the answer not in the manual?

Questions and answers

Related Manuals for T3 Motion MotionTrak 330 4CH

Summary of Contents for T3 Motion MotionTrak 330 4CH

  • Page 1 USER GUIDE USER GUIDE VER 2.1.0 2 Edition Edition Thank you for purchasing this Drive Recorder. Before using the Drive Recorder, please ensure that you read and understand this USER GUIDE. Please store this USER GUIDE in an easily accessible location. Before connecting and installing this Drive Recorder please Before connecting and installing this Drive Recorder, please refer to the appropriate instruction manual for proper operation.

  • Page 3: Information To The User

    INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Safety Advice

    SAFETY ADVICE CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Please make sure you follow the safety advice/instructions given in the user guide. Caution THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

  • Page 5: Gps Reception

    GPS Reception Activate this product in an area without large buildings to improve GPS reception. The commercial purpose GPS has the average rage error of more than 15 meters and the range error could be more than 100 meters due to environmental conditions like buildings, roadside trees etc. The temperature range for optimum operation of the GP S receiver in a vehicle is -14 ~ 122°F (-14 10 ~ 50°C).
  • Page 6 CONTENTS A set of the following items is included with each MotionTrak330 4CH order. 1. MotionTrak330 4CH unit 2. 4GB SD memory card (The PC Viewer software is in the provided SD card ) in the provided SD card.) 3. GPS Antenna module 4.
  • Page 7 INTRODUCTION FRONT Audio/Video Output Camera3 SD Door External MIC input SD Slot Input REAR BUZZER Internal Microphone Remote Control Input Power Input & & GPS Input GPS Input Alarm (Car Signal) Input Rear View Camera1,2 Input (Turn left, Turn right, Camera4 Input Brake, Speed pulse)

  • Page 8: Remote Controller

    INTODUCTION REMOTE CONTROLLER Record LED BLUE LED SHUTTER BUTTON Overwrite LED RED LED RED LED PLAY BUTTON PANIC BUTTON Audio Video Output Cable Audio out 1 Video out 1 Video out 2 [Note] The same screen will be shown through the Video out 1 & 2.
  • Page 9 INTRODUCTION Power & Vehicle Signal Input Black (Ground) Red(+) Yellow (Alarm 3) BLUE (Alarm 1) FUSE 250V 3A White (Speed pulse) Green (Alarm 2)
  • Page 10 FUNCTION (MAIN UNIT) Automatic start Make sure that peripherals including all cameras are properly connected. Turn on the vehicle power the MotionTrak330 4CH automatically start (Use Turn on the vehicle power, the MotionTrak330 4CH automatically start. (Use the power cable provided.) Notice : The unit will not begin recording immediately after the power is applied, it takes approximately 1 minute for the built-in power backup system to charge.
  • Page 11 FUNCTION (MAIN UNIT) SD Memory Card Format Remove power from the unit, Press and hold the [PLAYBACK] & [PANIC] button. Then reconnect power to the unit. Press and hold the [PLAYBACK] & [PANIC] for more than 2 seconds after applying power. The SD card initialization will begin. Once complete, all video &...

  • Page 12: Operation

    OPERATION 1. Make sure that the power cable is properly connected and turn on the vehicle power. 2. The Blue LED & Red LED will illuminate and slowly blink simultaneously, then the Blue LED will remain constantly on. The Blue LED light means the MotionTrak330 4CH is now ready for the event recording and has started the Normal recording (Continuous recording).

  • Page 13: Information Osd

    OPERATION INFORMATION OSD Press [PLAY] button then the INFORMATION OSD (the summary of setting) Press [PLAY] button then the INFORMATION OSD (the summary of setting) will show up on the monitor as below, CAM1 CAM2 CAM3 CAM4 √ √ √ √ √...

  • Page 14: G-Sensor Calibration

    OPERATION G-Sensor Calibration G-Sensor Calibration is needed after installing the MotionTrak330 4CH G Sensor Calibration is needed after installing the MotionTrak330 4CH. This calibration detects the installed direction of the MotionTrak330 4CH to accurately record the journey direction. Press and hold [PANIC] & [SHUTTER] button together and then power on the unit, the G-Sensor Calibration screen will be displayed.
  • Page 15 OPERATION PANIC RECORD BY PANIC BUTTON The panic recording by [PANIC] button is started by pressing the [PANIC] The panic recording by [PANIC] button is started by pressing the [PANIC] button, one short “Beep” will sound. The Blue LED will blink during the panic recording.
  • Page 16 OPERATION PLAYBACK Press and hold [PLAY] button for more than 2 seconds the latest recorded Press and hold [PLAY] button for more than 2 seconds, the latest recorded file will playback on the screen. [WARNING] Recording cannot be done during playback. Explanation of PLAYBACK control button Channel change: Press [PANIC] button.
  • Page 17 SOFTWARE USER GUIDE MotionTrak330 4CH PC Viewer User Guide [PC SYSTEM REQUIREMENT] Recommended PC specifications for PC Viewer software Windows 2000, Windows XP Windows Vista, Windows 7 Pentium4 2.6GHz or higher 512MB or higher Interface SD Memory Card Reader Install 20MB or higher Free space Backup 2GB or higher Display...

  • Page 18: Installing Procedures

    INSTALLING PROCEDURES PC Viewer software is loaded in the provided SD card. 1 Connect the SD card to a PC (if the computer does not have SD card slot 1. Connect the SD card to a PC (if the computer does not have SD card slot use the USB SD card reader) and open the “My Computer”.
  • Page 19 Connect SD memory card 1. Connect SD memory card into the SD card reader. 2. Run “PC Viewer MotionTrak330 4CH”. 3. Select [File] and then click “Select Data Folder” or Click [OPEN] button. [OPEN] button 4 Select SD memory card folder at the folder select window 4.

  • Page 20: Pc Viewer Setting

    PC VIEWER SETTING To set PC Viewer select [File] and then click” PC Viewer Setting”. This setting is for the PC Viewer software itself. To set the recorder, refer to page 27. The ‘date’ formats and ‘speed’ unit will be set automatically according to the PC Windows setting.

  • Page 21: File Loading

    FILE LOADING Check the file from the list using mouse or click [All] button and then click [Load] button. Check the file [All] Button [Load] Button All recordings and snapshot files will appear the file area under the tab: The Event file list recorded by G-sensor Motion detection, or Alarm 1~3. The Panic file list recorded by pressing the [PANIC] button.

  • Page 22: Playback Screen

    PLAYBACK SCREEN [NOR]: Normal Recording [G-Sensor]: Event Recording Display frame/Total frames number Playback position indicator Event data search button is enabled when playing back Normal The Yellow mark indicates there is an recorded files. Event triggered by the G-sensor, Alarm 1~3 or the [PANIC] button.
  • Page 23 PLAYBACK 6. Click [PLAY] button for playback. Playback speed CH1 CH2 CH3 Date & Time Volume Drag & Move the white line to move the playback position. Playback buttons X2, 4, 8, 16 X0.5, 1 X0.5, 1 X2, 4, 8, 16 Fast Reverse Reverse Play...
  • Page 24 PLAYBACK NOTE: PC Keyboard hot buttons Function PC keyboard hot buttons 1024x768 mode Enter Return to the previous mode: Enter Full screen mode Alt + Enter Return to the previous mode: Enter Playback speed control Playback speed control Ctrl + F Ctrl + F 0.5 =>...
  • Page 25 Google map (Event Recording File) The route taken will be displayed on the Google map at lower right corner of the software. To see the route & position on the Google map, the GPS data should be recorded with video. To see the map, the PC should be connected to...

  • Page 26: Thumb-Nail Function

    Thumb-nail Function 7. Click button for 4x4 multi view (Thumb-nail function) Click the thumb-nail image to change the playback position. Click right button of mouse to go back to single/Quad image playback mode. 8. Click [Close] button to quit the event playback. Cli k [Cl Click [Close] to finish ] t fi i h...
  • Page 27 Save JPG file & AVI file Pause the playback and click ‘Save Image’ icon to make a JPG file. ‘S ‘Save Image’ icon ’ i Pause the playback and Click ‘Save AVI’ icon to make a AVI file. ‘Save AVI’ icon...

  • Page 28: Print Image

    Print image 11. Pause the playback and click ‘Print Image’ icon. Print image icon. Input [Print Title] & [Print Comment] using Keyboard. Total Print Comment window allows up to 7 lines total.

  • Page 29: Make Report

    Make Report 12. Click [Print] button in the print preview windows for printing. [Print Title] & [Print Comment] & G-sensor graph & map will be printed on the first page first page. Click [ 2x2 ] and then click [Print] to print 4 images in one page. To print CH1~3 together select 1frame only.
  • Page 30 Backup 13. Click [Backup] icon to backup the files to the PC. [Backup] icon. Check & Load [Event], [Normal], [Panic] [Log] & [Memo] data first, before clicking the [Backup] icon. The selected files will appear in the lists in the Backup windows or Check [Backup All] and press [Start] button to backup all files.
  • Page 31 Setting Drive Recorder 14. Click [Setting Drive Recorder] icon for setup. [Setting Drive Recorder] icon [Setting Drive Recorder] icon. Caution Backup the SD card data first, before clicking the initialize SD card button or before changing the Record Mode from Normal Mode to Event Mode or vice versa.
  • Page 32 Setting Drive Recorder To record Camera2 or Camera3, Camera4 check “Use” box. To record Audio, check “Record Audio” box. To use Motion Detection as an Event, check “Motion” box per camera. Record Mode Record Mode Normal Mode: Continuous recording will automatically Normal Mode: Continuous recording will automatically start after booting the MotionTrak330 4CH.
  • Page 33 Setting Drive Recorder Resolution PAL: 720x576, 720x288 NTSC: 720x480, 720x240 1 Camera supports 1~25 fps@ 720x576, 1~25 fps @ 720x288 Frame Rate 1 Camera supports 1~30 fps@ 720x480, 1~30 fps @ 720x240 2 Cameras supports 1~12 fps @ 720x576, 1~25 fps @ 720x288 2 Cameras supports 1~15 fps @ 720x480, 1~30 fps @ 720x240 3 Cameras supports 1 ~ 8 fps @ 720x576, 1~12 fps @ 720x288...
  • Page 34 Setting Drive Recorder To record the vehicle signal with video, set the Alarm configuration as follows: To use the Alarm as an Event trigger, (i.e.: so Event recording will start when a door is open or Meter is on) set the Alarm configuration as follows: G-Sensor setting If the G-sensor sensitivity value is set too high approximately 5 the unit becomes If the G sensor sensitivity value is set too high approximately 5, the unit becomes...
  • Page 35 Setting Drive Recorder Vehicle ID Type in the Vehicle ID Password Password Enter 4 numbers from 1000 to 9999 as a password Enter 4 numbers from 1000 to 9999 as a password. The [Search on system] function (Playback on a car) will not work after setting the password.
  • Page 36 Setting Drive Recorder Before using “Car Pulse Type” connect the White (Speed pulse) cable to Before using “Car Pulse Type”, connect the White (Speed pulse) cable to the speed pulse line on the vehicle. Please consult the vehicle manufacturer or a repair shop regarding this connection. To receive the speed from the vehicle using the White (Speed pulse) line, select the speed pulse type of the vehicle.
  • Page 37 Setting Drive Recorder Initialize SD card : All data will be deleted and the configuration of Drive Recorder will default to the factory settings. Delete Record Data : All data will be deleted. Caution Once the record setting was changed, all recorded data in SD card will be removed automatically.
  • Page 38 Setting Drive Recorder 15. Click [About] icon to check the product information. About icon...

  • Page 39: Log File Playback

    LOG FILE PLAYBACK 16. Select [LOG] tab windows and then check the log from the log list using mouse or click [Check All] button. Then click [Load] button. Log data Log data will be recorded during driving even if there are no events.
  • Page 40 GPS LOG TO KML CONVERTER (for Google Earth) Google Earth icon To see the whole route on Google Earth select a log file and click Google To see the whole route on Google Earth, select a log file and click Google Earth button.
  • Page 41 GPS LOG TO KML CONVERTER (for Google Earth) Google Earth lets you import the log data and save routes, add place marks (i.e. customer pick up locations or other points of interest), add driving routes (to compare with the actual route taken and it lets you save it all within Google Earth for easy and free data management.

  • Page 42: Appendix (Firmware Update)

    APPENDIX (Firmware Update) First, update the MotionTrak330 4CH main unit, Second, install new PC Viewer software on a PC and then initialize the SD card using the new PC Viewer software the SD card using the new PC Viewer software. [NOTE] To get updated firmware, please contact your local distributor, new firmware versions are released occasionally by D-TEG.
  • Page 43 APPENDIX (Update) 3. Uninstall the old version PC Viewer software from the PC. PC Windows [Start] => [Control panel] And uninstall [PCViewer] And uninstall [PCViewer] 4. Install the new PC Viewer software onto the PC. Run setup.exe and install the new PC Viewer software X.X.X.X Note: After installation the new PC Viewer software will initialize the SD card and the new software will automatically be copied to [pcsw] folder on the SD card.
  • Page 44 Recording / Storage Time Table (NTSC) Note: This table is for guideline only. Actual results may very depending on a variety of factors (Video signal, image, etc.).
  • Page 45 Recording / Storage Time Table (PAL) Note: This is a guideline only. Actual results may very depending on a variety of factors (Video signal, image, etc.).
  • Page 46 Buzzer / LED specification * Buzzer specification Condition Buzzer No. Buzzer On Buzzer Off Event 1 sec SHUTTER(Snap shot) 200 msec Press button and then 200 msec changed mode continuously 500 msec 500 msec SD card fail Stop by pressing [PANIC] button SD card full at [One time] continuously...

  • Page 47: Specifications

    SPECIFICATIONS Model: MotionTrak330 4CH CH1- 5V camera in, CH2- 5V camera in, Video In Video In CH3- 5V camera in, CH4- camera in Audio In 1CH (Internal / External Microphone) AV Out 1 Video out, 1 Audio out Continuous record NTSC: 720x480 (30fps) 720x240 (60fps) Event record PAL:...

  • Page 48: Technical Support And Warranty

    Technical Support & Warranty TECHNICAL SUPPORT For Technical Support, please contact your local distributor. LIMITED WARRANTY This product is covered by a 1 year warranty. This Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear.

  • Page 49: Optional Accessories

    Optional Accessories DC 5V, CMOS camera for MotionTrak330 4CH 1/4" CMOS Digital Sensor 310K pixels DTR-100 Angle of View: 170° [horizontal(131°) vertical (96 °)] Effecti e Pi el 648 (H) Effective Pixel: 648 (H) x 488 (V) (NTSC/PAL) 488 (V) (NTSC/PAL) Video out: 1.0 Vp-p (Composite) Min.
  • Page 50 Optional Accessory (Safe Power Cable) Model name: DPWR‐300  The safe power supply cable allows the Drive Recorder series  to be hard wired to the fuse box of the vehicle. Fuse: 250V 1A The safe power supply cable will automatically cut  off the battery power when battery voltage  dropped below 12V or 24V. dropped below 12V or 24V. Connect (+) to the fuse box Connect (+) to the fuse box. It should be connected to an battery circuit. The ground cable should be connected to car chassis.
  • Page 52 2990 Airway Avenue Building A Costa Mesa, CA 92626 (714) 619-3600 phone (714) 619-3616 fax http://www.t3motion.com http://www.motiontrak.com C 2011 T3 Motion, Inc.

Table of Contents