Advertisement
Quick Links
Advertisement
Related Manuals for SNUGSQUARE HANNA TABLE
Summary of Contents for SNUGSQUARE HANNA TABLE
- Page 1 HANNA TABLE...
- Page 2 Gather Your Eggs... Table Top Shelf Legs + Dowels Hammer required 3x Bolts Hex Key (not included) Note: Please retain all boxes until you are certain that your product isn’t damaged and that you do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
- Page 3 Step 1: Insert Dowels Into Table Top Place table top face down on a soft material to avoid scratching. Insert wood dowels into table top holes. Tap gently with a hammer, just enough to where you feel the dowel bottom out. Repeat for all dowel holes.
- Page 4 Step 2: Attach Legs to Bottom Shelf Place one of the legs on it’s side with the notch facing up. Take your bottom shelf. With pockets facing towards the tapered end of the leg, insert the shelf notch into the leg notch. Then insert a screw in the pocket and using the rounded end of the hex key, loosely tighten to leg.
- Page 5 Step 3: Attach Table Top Next, attach the legs to the table top. Align the holes on the legs with the dowels on the table top. Press down on legs evenly, making sure not to seperate legs from bottom shelf. If needed, flip your table over and press the table top down to fully engage the wood dowels.
Need help?
Do you have a question about the HANNA TABLE and is the answer not in the manual?
Questions and answers