Audio Technica ARTIST ELITE AE2300 User Manual

User Manual
Thank you for purchasing this product. Before using the product, read through the user manual to
ensure that you will use the product correctly.
Please keep this manual for future reference.
■ Features
• Tailored to capture sound from guitar amps, brass and woodwinds, drums and percussion
instruments with equal clarity and precision
• Proprietary double-dome diaphragm construction improves highfrequency and transient
response
• Excels in high-SPL applications and maintains directionality across the entire frequency range
• Minimal off-axis coloration (frequency response is nearly identical at 0°, 90°, and 180°) helps to
maintain phase coherence in multiple microphone setups
• Switchable low-pass filter removes harsh, high-frequency content without negatively affecting
the overall tone of an instrument
• Low-profile design allows microphone to be placed easily and unobtrusively in a wide variety of
setups
• Rugged, brass metal construction ensures dependable performance in live music applications
• Isolation stand clamp provides secure mounting, versatile positioning, and effective dampening
of unwanted mechanical noise
■ Notes on use
The AE2300 is a dynamic microphone with a cardioid polar pattern. It is designed specifically for
musical instrument pickup in the studio and on stage.
The cardioid polar pattern of the microphone is more sensitive to sound originating directly in
front of the element, making it useful for controlling feedback and reducing pickup of unwanted
sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is equipped with a switch that permits choice of flat response or high-frequency
roll-off (via integral 6 kHz low-pass filter).
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
■ Safety precaution
Although this product was designed to be used safely, failing to use it correctly may result in an
accident. To ensure safety, observe all warnings and cautions while using the product.
■Cautions for the product
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty
place.
■ Connection procedure
Connect the output terminals of the microphone to a device that has a microphone input
(balanced input). The output connector is an XLRM-type with polarity as shown in the figure
below.
Output terminals
PIN1 (ground) PIN2 (hot)
PIN3
(cold)
All manuals and user guides at all-guides.com
■ Specifications
• 1 Pascal = 10 dynes/cm
* Typical, A-weighted, using Audio Precision System One.
For product improvement, the product is sublect to modification without notice.
■Polar pattern
■Frequency response
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Cardioid Dynamic Instrument Microphone AE2300
Element Dynamic
Polar pattern Cardioid
Frequency response 60 - 20,000 Hz
High Frequency roll-off 6,000 Hz, 6 dB/octave
Open circuit sensitivity -57 dB (1.4 mV) re 1V at 1 Pa
Impedance 250 ohms
Switches Flat, roll-off
Weight 138 g
Dimensions
95.6 mm long, 28.0 mm maximun diameter
Output connector Integral 3-pin XLRM-type
Accessories furnished AT8471 isolation clamp for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter;
soft protective pouch
= 10 microbars = 94 dB SPL
2
0°
330° 30°
300°
60°
270° 90°
240° 120°
210° 150°
180°
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
20
10
0
-10
-20
-30
50 100 200 500 1k 2k
Frequency in Hertz
LEGEND
0°, 50cm
Roll-off
10 dB
5k 10k 20k
07-DEC--2020 Form No.ATGC-L0385-20