Magic MISTER KOOL II User Instructions page 3

Set-Up
1. Set the machine on a flat dry surface and unscrew the knob on the top of
the unit.
2. Open the top of the unit, and fill the inside of the Mister Kool II fog machine
with ice.
3. Remove the reservoir cap located on the top of the machine.
4. Fill the Mister Kool II fog machine reservoir with provided fog juice only and
replace the cap.
5. Insert the water tube into the water bag. When the ice melts. The water
will empty into the bag.
6. Firmly attach the remote control to the remote control socket located on
the rear unit.
7. Plug the unit into a matching power supply and flip the power switch to the
on position.
8. Follow the operating instructions on the next page for proper remote
operation.
Always be sure to maintain an adequate supply of provided fog juice in the fluid
reservoir. Running the fog machine dry will cause pump failure and / or
clogging. This is the largest cause of failure in fog and fog machines.
Office: (804) 230-1500 Magic Special Events www.MagicSpecialEvents.com