Summary of Contents for Clip Sonic TEC598
- Page 1 User manual Motorized stabilizer for smartphone Reference : TEC598 Version : Language : English WWW.CLIPSONIC.COM...
-
Page 2: Safety Instructions
User manual Thank you for buying our CLIP SONIC product. We take great care in design, ergonomics and ease of use of our products. We hope that this product will give you complete satisfaction. This instruction manual is also available on our website www.clipsonic.com... - Page 3 User manual PRODUCT PARAMETERS Compatible Phones SMART phone with screen size less than 5.5 inch Pitch axis angle ±175 degree range Horizontal shaft ±55 degree angle Pitch axis control ±45 degree angle (Only available for Low consumption. Intenational Bluetooth 4.0 standard Bluetooth®...
- Page 4 User manual Handled stabilizer Charging cord Hex allen wrench Velvet bag User manual EVA thickening pads STRUCTURES OF HANDHELD STABILIZER Green LED light is on when charging. • LED light is off when charging is completed. Power switch (press and hold for 2 seconds to turn on/off) LED indicator...
-
Page 5: Quick Start
User manual This stabilizer is motor-lock protective. When bumped ATTENTION or obstructed, the stabilizer will automatically power off in 10-15 seconds. The packaging and user manual contain important information, please keep for future reference. QUICK START Attention : Please do not turn on the stabilizer before placing your smartphone on the stabilizer. - Page 6 User manual If the phone is tilted on the right as shown, to adjust gravity of the roller, you need to push the phone on the left. If the phone is tilted on the left as shown, to adjust gravity of the roller, you need to push the phone on the right.
-
Page 7: Bluetooth Pairing
User manual If the screen of your phone faces up as shown, please adjust screw of the roller in clockwise. The adjustment should be less than a circle. And please make sure the screw should not be lower than the top of the plastic cone or the stabilizer will be damaged. -
Page 8: Troubleshooting
User manual Power on - Press power button 2 seconds to turn on the stabilizer. Blue light beside the power button flashes dimly, indicating the stabilizer is searching for Bluetooth® devices. Search - Normally, it takes the phone 3 seconds to search for available Bluetooth®... - Page 9 BP61071 67452 Mundolsheim – France Herewith declare under our sole responsibility, that the radio equipment Motorized stabilizer for smartphone TEC598 (Frequency range 2402MHz-2480MHz) Fulfils the essential requirements of the Directive 2014/53/UE The following standards were applied: Radio: EN 300 328 V1.9.1...
- Page 10 The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product. CLIP SONIC BP 61071 67452 Mundolsheim •...
- Page 11 User manual...
Need help?
Do you have a question about the TEC598 and is the answer not in the manual?
Questions and answers