Product Information WHAT IS HOME CARE ? It is the smart health check system that will help check and analyse your health by regularly collecting your measurements then give basic recommendations on how to take care of your health. This is done by collecting data from devices such...
Page 5
Health Data Analysis Health Information Report Health Care Recommendations Can easily analyse your health Health records and health reports Recommends appropriate personal by yourself to get accurate and precise via smart health care monitors. self-care routines. health information. Saves Time Easy to Use Health check-ups can be done Health checks can be done anytime...
Page 9
Thermometer CHOOSE MODE POWER Press the power button. Choose a temperature measurement mode. MEASURE Point the device to the Press the power button forehead within a 3 cm. again to measure the temperature.
Page 10
Blood Pressure Monitor Before taking the measurement, sit down for at least 10 minutes to attain your normal heart rate. | 09...
Page 11
Wrap the cuff around either arm Place your arm so that the device and tighten the strap so the red tab is at the same level with your heart. is on the upper arm about 2 cm Then press the blue button at the bottom above the elbow.
Page 12
Body Weight and Body Composition Device Take off your shoes Stand on the device and socks before to weigh. you start weighing. | 11...
Page 13
Blood Sugar Monitor Insert the glucose test strip into the machine. Once the code appears on the screen, press the “next” button.
Page 14
Draw blood with a lancet needle Next, slide the bar on the left side and touch the end of the test strip of the device to release the test strip. with a drop of blood. The device screen The result will be displayed on will show a countdown of 5 seconds.
Page 15
Blood Oxygen Monitor Turn on the Oximeter by pressing the button once.
Page 16
Use one hand to hold the clamp open with the screen side up it will display the blood oxygen level and pulse rate on the display screen. hand into the rubber hole. (The amount of oxygen in the To measure the oxygen level, blood and the pulse rate will change over time according to the actual and wait for the device to measure.
Page 17
Electrocardiogram Monitor POWER Turn on the device by Then, measure the value pressing and holding by lightly press both palms the middle button. to the edges of the device.
Page 18
Wait approximately Release both hands 30 seconds for the from the device. device to beep.
How to Use the Application “ Home care the Smart Home Health Check-up kit. Because we want you to be healthy. It was developed in order to analyse health data with recommendations on how to take care of your health.
Page 20
Getting Started * When opening the application for introductory tutorial on how to use the application.
Page 21
How to use the application Scroll down to read the entire terms and policies.
Page 22
Press the “ ” to indicate Once the information is required information. that the text has been completed, press the read thoroughly. “ ” button. Press the “ ” button to accept the mentioned “ ” policy and conditions.
Page 23
Select your birthday and Select your gender and Correctly enter the OTP press the “ ” button. press the “ ” button. received from the registered phone number. “ ” “ ”...
Page 24
Enter the 6 digit code you The registration is completed. button to complete the want to set (and memorise registration process. for future use)
Basic Troubleshooting Device not working properly because the Changing the password and there is a delay battery is low in the delivery of the OTP : Please replace the battery. : If you do not receive the OTP immediately, please wait for 60 seconds.
Need help?
Do you have a question about the HOME CARE and is the answer not in the manual?
Questions and answers