Advertisement
Quick Links
Advertisement
Related Manuals for Solo 220
Summary of Contents for Solo 220
- Page 1 Quick Start Guide Solo 220 Detector Removal Tool...
- Page 2 Detector Removal Instructions for AutroGuard® Multicriteria Detectors Important: Before any work begins on the fire detection system, all necessary persons should be notified that the fire system is to undergo maintenance and that the system, or part of it, will be temporarily out of service. Ensure the control panel is in ‘Test Mode’...
- Page 3 AutroGuard® Multicriteria Detector removal/ replacement using the Solo 220 Removal Tool 1. Position Position the removal tool over the detector and apply gentle upward pressure to engage the sprung arms.
- Page 4 2. Remove Rotate the removal tool anti-clockwise whilst applying gentle pressure to disengage the detector from its base. Note: When replacing a detector rotate the removal tool clockwise whilst applying pressure to engage the base of the detector.
- Page 5 3. Lower Carefully lower the removal tool keeping it upright.
- Page 6 Removal of dust cover for AutroGuard® Detectors with Solo 220 Dust Cover Adapter Tool 1. Attach & Position Attach the Dust Cover Adapter to the Solo 220 Removal Tool and position the catches above the sprung arms to partially engage...
- Page 7 2. Remove Guide the removal tool onto the detector and apply gentle pressure to grip the dust cover. 3. Lower Lower the removal tool to detach the dust cover from the detector.
- Page 8 Application of dust cover for AutroGuard® Detectors with Solo 220 Dust Cover Adapter Tool 1. Attach & Position Attach the Dust Cover Adapter to the Solo 220 Removal Tool and position the catches beneath the sprung arms.
- Page 9 2. Place Place the dust cover onto the adapter. 3. Secure Guide the dust cover onto the detector and apply gentle pressure to ensure it is engaged securely.
- Page 10 UK: No Climb Products Ltd Welham Green, AL9 7JE, UK Tel +44 (0)1707 282 760 EU: shift-consult Hubert Scherzinger 79108 Freiburg, DE Tel +49 (0) 7665 91 21 74 support@detectortesters.com...
Need help?
Do you have a question about the 220 and is the answer not in the manual?
Questions and answers