Nobile R600 Mounting And Operation Instructions page 4

Montage-/ Betriebsanleitung
Mounting-/Operation Instruction
Mounting instruction:

Mark the drill holes on the ceiling, e.g. using the mounting bracket as a template, and drill the holes.

Fasten the mounting bracket with the screws.

Set the desired rope length and then shorten the rope accordingly.

Connect the luminaire to the control gear, observing the polarity of the luminaire. Connecting with wrong polarity may cause permanent
damage to the luminaire.

Connect the control gear to the mains, observing the labeling of the control gear (L, N, PE).

For dimmable version Dali and 1-10V, the control line must be connected, observe the labeling of the control gear.

Insert the control gear into the canopy.Screw the canopy to the mounting bracket.
1
4
LED Pendel-Panel R600 35W
LED Pendel-Panel RT600 UGR19 35W
7
Technische und gestalterische Änderungen im Zuge stetiger Produktentwicklungen vorbehalten.
Technical and design changes due to product developments are subject to change without prior notice.
nobilé AG – Wächtersbacher Str. 78 - 60386 Frankfurt/M. Germany - www.nobile.de
2
5
8
rev. 0.1 – 15.02.2022
Seite 4 von 4
3
6