Table of Contents
Advertisement
PRODUCT ASSEMBLY
NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work
Bowl Cover.
5
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed
and the Work Bowl is properly seated on the Base.
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
1
Place the Blade on the Drive Adapter.
Rotate the Blade so it falls down to the
base of the Adapter.
6
Once the Work Bowl Cover is closed,
push the Lid Hinge down into the locked
position.
2
Install the Work Bowl Cover, and be sure
the Lid Latch is pushed down to the
locked position.
7
Advertisement
Table of Contents
