Advertisement
Quick Links
FOR YOUR PERMANENT FILE
WRENCH MODEL NUMBER:
WRENCH SERIAL NUMBER:
For Warranty Claims, Contact CDI Torque Products
at (626) 965-0668.
LIMITED WARRANTY
The CDI Torque and Angle Electronic Torque
Wrench is backed by a one year warranty. This
warranty covers manufacturer defects and
workmanship. The warranty excludes misuse,
abuse and normal wear and tear. Exclusion is not
allowed in some states and may not apply. This
warranty gives you specific legal rights, and you
may have other rights, which vary from state to
state.
IMPORTANT ENVIRONMENTAL NOTES:
1. This equipment may contain hazardous materials which can be
harmful to the environment.
2. Do not dispose of this equipment as municipal waste. Return it
to the distributor or a designated collection center.
Thank you for caring about our environment!
19220 SAN JOSE AVENUE • CITY OF INDUSTRY, CA 91748 • USA
(626) 965-0668
Find other fine torque products at WWW.CDITORQUE.COM
Form 20-1900-CDI
6/2010 Rev. N/C
US and Foreign Patents Pending - Made in USA with US and Global Components
OPERATION MANUAL
TORqUE ANd ANgLE
ELEcTRONIc
TORqUE WRENcH
Advertisement
Related Manuals for CDI 1002TAA
Summary of Contents for CDI 1002TAA
- Page 1 WRENCH MODEL NUMBER: TORqUE ANd ANgLE ELEcTRONIc TORqUE WRENcH WRENCH SERIAL NUMBER: For Warranty Claims, Contact CDI Torque Products at (626) 965-0668. LIMITED WARRANTY The CDI Torque and Angle Electronic Torque Wrench is backed by a one year warranty. This warranty covers manufacturer defects and workmanship.
-
Page 2: Safety Messages
• Observe all equipment, system and 1. IMPORTANT - Service, repair and calibration are manufacturer’s warnings, cautions and to be performed by CDI Torque Products only. procedures when using this wrench. Calibration by the user is recorded in the wrench •... - Page 3 INTROdUcTION The CDI Torque & Angle wrench digitally displays and “- - - -” and the buzzer pulses. The wrench must be monitors fastener torque and angular rotation (turn). reset by pushing the ON/OFF button. DISPLAY MODES In the angle display mode, the display shows the...
-
Page 4: Operator Instruction
OPERATOR INSTRUcTION USE OF AdAPTERS, 100% 100% ExTENSIONS ANd UNIVERSALS 100% 100% 100% REPLACE BATTERY REPLACE BATTERY REPLACE BATTERY REPLACE BATTERY REPLACE BATTERY Anytime an adapter, extension or universal is used with a torque wrench in such a way that the fastener BATTERY TORQUE INCREMENT... -
Page 5: Specifications
PEAK HOLD - 10 sec. flashing at torque release 2. NOTES - If the display shows “Err0” at power on, the ACCURACY (72° F) wrench is damaged and must be returned to CDI ANGLE: +/-1% of reading +/-1° angular velocity > Torque Products for repair. 10°/sec < 180°/sec - If the display shows “ErrA”... -
Page 6: Conversion Table
cERTIFIcATION USE OF ExTENSIONS ANd AdAPTERS This torque wrench as calibrated at the factory, is certified to meet the current ASME specification. When using an extension or adapter (increasing the Additionally, all wrenches are calibrated on a torque effective length of the torque wrench) the output standard traceable to the National Institute of torque value will change.