tws TX-3S Instruction Manual

TX-3S
INSTRUCTION MANUAL
Transmiter Feature Diagram
FUNC CH3
Power
Switch
Ba ery Compartment
Antenna Wire
Please refer to the full-version manual if you need more detail.
如需更詳細的資訊，請參閱詳盡版說明書。
2.4GHz
D/R Steering Wheel
ST L/-
TH Fwd/+
LED
ST R/+
TH Rev/-
Trigger
LED Bind Bu on
B / Ba ery
3 / Auxiliary
2 / Thro le
1 / Steering
Install Ba eries
1. Remove the ba ery cover from the transmiter.
2.Install 4 AA alkaline dry cell ba eries.
3.Insert the 4 AA ba eries according to the polarity.
4.Replace the ba ery cover.
Basic Opera on
Le
Switch Switch
Off On
Power Alarm
No Ac vity Alarm :
When the steering wheel (ST), thro le (TH) or any bu on is not operated for 15 minutes, a slow beeping
alarm will sounds to indicate that there has no ac on and the power should be turned off.
Low Ba ery Voltage Alarm :
A quick beeping alarm sounds and power LED light will blink.
Specifica on
Tx (Transmiter) Rx (Receiver)
Channels : 3 Antenna : Do not roll Antenna up
RF : ISM Band (2.4GHz) CH1 : for steering servo
Power : DC 6V CH2 : for ESC
Distance : Open Space 100m CH3 : AUX
Ba ery : Alkaline "AA" size Power : DC 4V~9V
Blue LED : indicators Bu on : Binding / Fail-Safe
Color : Black Blue LED : indicators
Color : Black
Right
Brake
On electric vehicle push
Forward
trigger twice for reverse.