Download Print this page

Sealey STF43Q Quick Start Manual page 2

43” quiet high performance oscillating tower fan

Advertisement

When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof
9
location.
NOTE: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. INTRODUCTION
High performance tower fan with advanced centrifugal blades for maximum air movement. Quiet operation and high durability motor. 5-carefully
programmed modes which include - Sleep/Calm/Refresh/Cool/Power. Offers quiet 70° oscillation allowing great airflow in any room. Additional
features include an 8hr timer, Easy-touch, Auto-dimming LED control panel and fully functional remote control and remote storage. Built-in handle
and ideal for home, bedroom and office environments. Easy-to-assemble, tool free.
3. SPECIFICATION
Model no: ..................................................................... STF43Q
Speeds: ...................................................................................5
Oscillation: ........................................................................... yes
Supply: ...................................................................230V~50Hz
Power: ............................................................................... 55W
Height: .........................................................................1080mm
4. ASSEMBLY
fig.1
4.1.
Pass power cord through the half of the base and thread it into the cable clamp (fig.1).
4.2.
Align the pegs of one half to the mounting sockets of the other half and press together to securely assemble the base.
4.3.
Using the supplied slotted thumbscrews, screw the base securely to the bottom of the body (fig.2).
5. OPERATION
WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using fan.
5.1.
The fan can be operated using either the buttons on top or using the remote control located in the centre of the top of the fan, see fig.1.
5.2.
Plug into the mains power and turn fan on by pressing button 'A'.
5.3.
Select the desired speed by cycling through the five speeds with button 'B'.
5.4.
The fan can be set to work constantly or for a time duration of 1, 2, 4 or 8 hours by cycling through with the Timer button 'C'.
5.5.
Press button 'D' to allow fan to oscillate.
5.6.
Store the remote control unit in the recess in the top of the fan unit, see fig.1. Note: Battery type CR2025, not supplied with product.
C
D
fig.3
6. MAINTENANCE
WARNING! Ensure that the fan is disconnected from the mains power supply before attempting any of the following:
6.1.
Use a soft, damp cloth to clean the outside of the fan.
DO NOT immerse the fan in water and never allow water to drip onto the motor housing. DO NOT use solvents, petroleum, paint thinner
8
or other chemicals to clean the fan.
6.2.
Should the motor, switch or the power lead require service or maintenance contact your local service agent.
6.3.
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof location.
© Jack Sealey Limited
fig.2
B
A
fig.4
Original Language Version
Maximum Flow Rare (F): .........................................32.2m³/min
Fan Power Input (P):: ..................................................... 49.2W
Service Value (SV):: ..........................................0.7 (m³/min)/W
Standby Power Consumption (Psb):: ............................... 0.2W
Fan Sound Power Level (Lwa): ................................... 61dB(A)
Maximum Air Velocity (c): ...............................................3.4m/s
A
B
C
D
STF43Q
Issue:1 24/01/22

Advertisement

loading