Download Print this page

Advertisement

Quick Links

PREFACE
The following installation rules should be respected in order to have the
best working order of the equipment and for the user's safety.
ENVIROMENTAL CONDITIONS
ENVIROMENTAL TEMPERATURE RELATIVE HUMIDITY
from 0 to + 55°C
from 5 to 95% n.c.
from 32 to 131°F
Rapid changes of temperature or humidity should be avoided (0,03°C/
min).
Dust, humidity, heat from direct sun light.
Objects which irradiate heat. These could cause damage to the container
or other problems.
Objects which produce a strong electtromagnetic field (loudspeakers,
etc.)
Liquids or chemical corrosive substances.
http://www.digicom.it
DECLARATION
OF CONFORMITY
This product satisfies the basic requirements of Electromagnetic
Compatibility and Safety of the below indicated Directive:
89/336/CEE of 3 May 1989 with subsequent modifications (Directive
92/31/CEE of April 28, 1992, Directive 93/68/CEE of July 22,1993 and
Directive 93/97/CEE of 29 October 1993).
73/23/CEE of February 19, 1973 with subsequent modifications
(Directive 93/68 ECC of July 22, 1993).
CHECK REPORT
The equipment has been successfully tested according to the check
procedure indicated on the inside back cover of the user's manual. It is in
conformity with the technical characteristics described in the users' manual
supplied with the equipment.
WARRANTY
WARRANTY CLAUSES
The equipment has a warranty which covers manufacturing and
operating faults for the period indicated on the inside back cover of the
user's manual.
The warranty is to be considered freight forward and the goods must
reach the address indicated below at customer's expences.
Warranty means the substitution or repairing of fault products. Working
hours used for repairing included in the warranty.
The estetic and the separable parts are not included in the warranty.
The warranty is not extended to equipments which have been subject
to misuse, improper installation, electric discharge or repaired by
unauthorized staff.
PCI CARD 10/100
User's Guide
Dear customer,
thank you for purchasing a Digicom product.
DESCRIPTION
With your Digicom PCI Card 10/100 network card you can connect your
PC to a Local Area Network regardless of its operating speed (10 or 100
Mbit/s).
Using PCI card 10/100 will bring several advantages thanks to its advanced
features and simple installation:
Plug and Play
Autosensing, operating speed is automatically detected as soon as cable
is plugged
Full Duplex at 10 and 100Mbit/s
Wake On Lan function
Driver support for most common operating systems
PACKAGE CONTENTS
PCI Card 10/100
User Guide
Wake On Lan cable
Driver diskette

Advertisement

loading

Summary of Contents for Digicom 10/100

  • Page 1 The warranty is to be considered freight forward and the goods must With your Digicom PCI Card 10/100 network card you can connect your reach the address indicated below at customer’s expences. PC to a Local Area Network regardless of its operating speed (10 or 100 Warranty means the substitution or repairing of fault products.
  • Page 2 Pin assignment informations. To install the PCI Card 10/100, power off your PC and remove the chassis cover. Next, select an unused PCI expansion bus slot and remove its Where needed a *.TXT file provides specific installation and use details.