Gfci Instructions; Using The Accessories - Kärcher K 210 Operator's Manual

GFCI INSTRUCTIONS

Step 1
Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.

USING THE ACCESSORIES

High/low spray wand
The High/low spray wand allows you to adjust the cleaning pressure. To clean at maximum
pressure, the High/low wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting (-).
5
Dirtblaster ® spray wand
This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted surfaces, decks or autos.
Step 2
Press "TEST", then
press "RESET" to assure proper
connection to power.
For higher pressure turn wand
tip to the plus (+) direction.
For lower pressure turn wand
tip to the minus (-) direction.
TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PER-
SONS OR ANIMALS
Note:
The actual
appearance
of the GFCI
may be
different from
this
illustration.
WARNING