Related Manuals for Muirhead 11450
Summary of Contents for Muirhead 11450
- Page 1 PRODUCT MANUAL IDLE TIMER ETR CONTROLLER 12/24 V Part No. 11450 | 11452 | 11951 | 12286...
- Page 2 LEGAL NOTICE You acknowledge that this document is protected under copyright law and Remote Control Technologies Pty Ltd or its related bodies corporate (“RCT”) owns the copyright in this document or otherwise have permission or licence from the relevant owner to use certain specific works.
-
Page 3: Table Of Contents
Suggested Wiring to Suit Late Model Komatsu Machines (513l) − External Wiring to Suit Shutdown When Shutdown Switch Activated With Key On Or Off (514z) Calibration 11450 Idle Timer Controller Calibration Mode Changing Idle Time Value Service Information Service Schedule... -
Page 4: General Safety Warnings
General Safety Warnings Personal Safety ■ Everyone is responsible for safety. ■ The installer/service personnel should be trained and authorized to complete the required work. ■ Ensure that the machine is safely isolated during installation and testing to protect all personnel. ■... -
Page 5: Product Overview
Product Overview The Muirhead Idle Timer Controller, part number 11450, is designed to ensure a machine is ‘idled down’ for ® the correct period of time as recommended by the original equipment manufacturer (OEM). This idle down period allows the machine to cool slowly and prevent engine damage from heat stress. A prime example of this is the engine’s turbochargers that require oil for bearing lubrication—the high temperatures of the... -
Page 6: Operation And Use
Operation and Use The Muirhead Idle Timer Controller, part number 11450, operates (by default) by shutting down the machine ® after a three-minute time delay when the ignition is switched off. The operation of the controller is detailed below; 1. Turn the ignition switch off. -
Page 7: Installation Guide
Installation Guide Install the controller in a suitable location preferably in the cabin. Refer to the wiring table below and the wiring diagram in this manual to connect the controller. It is recommended that the wiring is installed alongside the OEM wiring ensuring that it is secured at regular intervals;... -
Page 8: 9087 Upgrade Connection Details
(part number 11450). Match the plug and pin to the corresponding 12-pin Deutsch connection. Old Idle Timer (9087) Plug Connections New Idle Timer (11450) 12-Pin Deutsch Connections Plug A – pin 1 – BK-4 Pin 2 Plug A – pin 2 – YL/BU-4 Pin 3 Plug A –... -
Page 9: 5956 Upgrade Connection Details
5956 Upgrade Connection Details Refer to the following table if you are upgrading from an older RCT Idle Timer (part number 5956) to the new idle timer (part number 11450). Match the plug and pin to the corresponding 12-pin Deutsch connection. -
Page 10: Wiring Diagrams
Wiring Diagrams External Wiring Diagram (476l) 10 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd... -
Page 11: Loom To Suit Idle Time Controller (476M)
Loom to Suit Idle Time Controller (476m) PU-FVT BU-FVT OR-4 YL/BU-4 BN-FVT WH-FVT BK-4 RD-4 (11981) 11 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd... -
Page 12: Suggested Wiring To Suit Komatsu Machines (513C)
Suggested Wiring to Suit Komatsu Machines (513c) 12 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd... -
Page 13: Suggested Wiring To Suit Late Model Komatsu Machines (513L)
Suggested Wiring to Suit Late Model Komatsu Machines (513l) 13 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd... -
Page 14: External Wiring To Suit Shutdown When Shutdown Switch Activated With Key On Or Off (514Z)
External Wiring to Suit Shutdown When Shutdown Switch Activated With Key On Or Off (514z) 14 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd... -
Page 15: Calibration
Calibration 11450 Idle Timer Controller Setting No. Description Units* Default Idle time minutes The time the unit will keep the engine running when the key is turned off, adjustable between 1 and 12 minutes. Alarm output Pulsed Can be configured to be continuous or pulsed. -
Page 16: Service Information
11452 Idle Timer Kit Quantity Part No. Description Included Parts Suggested Parts 11450 Idle Timer Controller 11451 Loom to suit 11450 Idle Timer Controller 12286 Idle Timer Kit to suit Komatsu Quantity Part No. Description Included Parts Suggested Parts 11450 Idle Timer Controller... -
Page 17: Technical Specifications
Technical Specifications Dimensions, controller only: Length: 119 mm | Width: 80 mm | Height/Depth: 65 mm Dimensions, boxed for freight: Length: 220 mm | Width: 120 mm | Height/Depth: 120 mm Weight, controller only: 255 g Weight, including loom / packaging 600 g for freight: Input nominal voltage:... -
Page 18: Glossary
Glossary Amp (Ampere) Milliwatts alternating current Not Applicable Advanced Management System Normally Closed Auxiliary Output Normally Open Controller Area Network Original Equipment Manufacturer Control Master Input Output PCB Outputs CMIO Control Master Receiver Output Control Master Transmitter Push Button Control Master 2200 Remote Set Personal Computer CM2200 COMMS... - Page 19 Notes 19 | 20 M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd...
- Page 20 Discover more: www.rct-global.com sales@rct-global.com AUSTRALIA: +61 (0) 8 9353 6577 AFRICA: +27 (0) 83 292 4246 CANADA: +1 705 590 4001 RUSSIA / CIS: +7 (910) 411 11-74 SOUTH AMERICA: +56 3 5229 9409 USA: +1 801 938 9214...
Need help?
Do you have a question about the 11450 and is the answer not in the manual?
Questions and answers