Related Manuals for Baldwin DAHL 200 Series
Summary of Contents for Baldwin DAHL 200 Series
- Page 1 200 & 300 SERIES Diesel Fuel/Water Separators • Installation • Operation • Parts • Service Information...
-
Page 2: Installation
Fittings and gauges are DAHL recommends a 286-SK Mounting Bracket Shock Pad available from your dealer, or contact Baldwin Filters. Prime the filter as indicated under ELEMENT REPLACEMENT section. Kit if the filter will be subject to excessive vibration. - Page 3 200 & 300 SERIES DAHL FITTINGS CHART Note: Mount Model Before Installing Fittings. O-Ring Seal Fittings Require Care in Installation. DO NOT OVERTIGHTEN. See Instructions Below. FITTING FOR DAHL UNIT THREAD 1 THREAD 2 ORDER NUMBER 90° Elbow 200 Series 7/8-14 UNF 3/4-16 1010-10x8...
-
Page 4: Troubleshooting
200 & 300 SERIES SERVICING ___________________________________________________ RAINING WATER NOTE: The bowl should always be drained before water or 3. Close the draincock and follow the priming instructions contaminant levels reach the bottom of the depressurizer shown below. B. DAHL Units Mounted LOWER Than Fuel Storage Tank cone. - Page 5 200 & 300 SERIES 200 S & P ________________________________ ODEL PECIFICATIONS ARTS Recommended Flow Rate: 120 GPH (U.S.) (454 LPH) Port Thread: 7/8-14 w/O-Ring Boss Mounting Hole Pattern Height: 16 3/4 In. (425.5 mm) Width: 7 15/32 In. (189 mm) Depth: 7 3/4 In.
- Page 6 200 & 300 SERIES 300 S & P ________________________________ ODEL PECIFICATIONS ARTS Recommended Flow Rate: 180 GPH (U.S.) (681 LPH) Port Thread: 1 1/16-12 w/O-Ring Boss Mounting Hole Pattern Height: 22 1/4 In. (565.2 mm) Width: 7 1/2 In. (190.5 mm) Depth: 7 3/4 In.
- Page 7 200 & 300 SERIES 300-MFV S & P ___________________________ ODEL PECIFICATIONS ARTS Recommended Flow Rate: 360 GPH (U.S.) (1,363 LPH) Port Thread: 1-11 1/2 NPT Height: 22 1/4 In. (565.2 mm) Width: 25 In. (635 mm) Depth: 12 1/4 in (311.2 mm) 10.75 In.
- Page 8 Ask volume. This means the filters which came with the equipment are anyone who has used DAHL, or any Baldwin user, as Baldwin usually in the 10-30 micron range.