Philips SalonStraight Want2Move HP4646 Manual page 11

troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Customer Care Centre in your
country.
Problem
The
appliance
does not
work.
Possible cause
There is a power
failure or the socket
to which the
appliance is
connected is not live.
You have not
switched on the
appliance.
The mains cord is
damaged
Solution
Check if the power supply works.
If it does, plug in another
appliance to check whether the
socket is live.
Push the on/off slide upwards to
switch on the appliance.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by
Philips or similarly qualified
persons in order to avoid a
hazard.
EnglisH
11