SILVER LEAF ELECTRONICS VMS 240 CL Owner's Manual

Advertisement

Warranty
The obligation of SilverLeaf Electronics, Inc. under this warranty shall be
limited to repair or replacement (at our option) during the warranty period of any
part which proves defective in material or workmanship under normal installation,
use, and service, provided the product is returned to SilverLeaf Electronics, Inc..
The warranty period shall be one year from date of purchase of the VMS™, or
purchase of the finished coach with the VMS™ installed.
This warranty shall be invalid if the product is damaged as a result of
defacement, misuse, abuse, neglect, accident, destruction, alteration, improper
electrical voltages or currents, repair or maintenance by any party other than
SilverLeaf Electronics Inc. or an authorized service facility, or any use violative of
instructions furnished by us.
This one-year warranty is in lieu of all other expressed warranties,
obligations, or liabilities. Any implied warranties, obligations, or liabilities,
including but not limited to the implied warranties of merchantability and fitness
for a particular purpose, shall be limited in duration to the one-year duration of
this written limited warranty.
In no event shall SilverLeaf Electronics, Inc. be liable for any special,
incidental, or consequential damages for breach of this or any other warranty,
expressed or implied, whatsoever.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
SilverLeaf Electronics, Inc.
2490 Ferry St. SW
Albany, OR 97322
Worldwide: (541) 967-8111
Toll Free in US: (888) 741-0259
w w w . s i l v e r l e a f e l e c t r o n i c s . c o m
VMS 240 CL™
Owner's Manual
RV Version 4.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VMS 240 CL and is the answer not in the manual?

Questions and answers

Summary of Contents for SILVER LEAF ELECTRONICS VMS 240 CL

  • Page 1 This one-year warranty is in lieu of all other expressed warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities, VMS 240 CL™ including but not limited to the implied warranties of merchantability and fitness for a particular purpose, shall be limited in duration to the one-year duration of Owner’s Manual...
  • Page 2: Quick Start Guide

    Quick Start Guide Hidden Screens In addition to all the features already described, the VMS 240 also has a set of hidden screens that provide diagnostic information on the VMS and data bus, and allow further settings to be adjusted. Usually these screens are useful To Start a Trip only in the installation of the VMS.
  • Page 3: Table Of Contents

    Special Screens Table of Contents Press H to view any special features that may be present on your VMS 240. If no special features are available, the Splash Screen will appear. Quick Start Guide ........... 2 Theft Deterrent (Cat Engines Only) Drive Screens ............
  • Page 4: Drive Screens

    Drive Screens Special Features Pressing D brings up one of the Drive Screens. There are two RIVE The VMS has certain special features that monitor “behind the scenes” and variations, a Three gauge and a Six gauge version. Pressing the key again change the display according to the demands of the situation.
  • Page 5: Scan Screen

    should be set to Watch and Scan, while others are set to Hide and Skip. features to function properly. Scan Screen The Scan Screen provides the equivalent of over a dozen gauges in AntiTheft one package. The specific gauges depend on the engine model and This setting allows you to disable the Theft Deterrent feature, available configuration, and additional items may be available if additional sensors are with Caterpillar engines.
  • Page 6 All gauge items are obtained directly from the engine and transmission, generally be fixed by an engine technician. Consult your engine manufacturer and are digitally accurate. In general, the VMS is much more reliable and or SilverLeaf Electronics if you have any questions about whether your engine accurate than the supports a particular gauge.
  • Page 7: Trip Screens

    Engine returning the list to its original condition. This indicates the engine make and model. This must be set correctly to allow all tions. You can use the VMS to indicate when you have each of these Trip Screens groups performed, and the VMS will calculate when each group is due Press TRIP to activate the Main Trip Screen.
  • Page 8: Diagnostics Screens

    screen. The screen displays the date the trip ended, the miles travelled, fuel used, engine running time, average speed, and fuel economy (MPG). Information Screens Diagnostic Screens Whenever the engine detects a problem, it activates the Check Engine light on Daily Data the dashboard.

Table of Contents