Connect Power - HP X5400 Start Here Manual

step 6
Connect power to the Media Center Extender
Plug the Media Center Extender into the wall power socket (or power
strip). Turn it on by pressing the power switch on the back of the unit.
If the Media Center Extender still does not start, press the STANDBY
button on the front of the unit.
step 7
Turn on your TV
Change the video input on the TV to the same input to which the
cables are connected. For example, if you connected the video and
audio cables to VIDEO 1, change the TV input to VIDEO 1.
On either the TV or the TV remote control, look for a button labeled
TV/VIDEO (or similar designation such as VIDEO 1, VIDEO 2). This button
should change the video inputs. If you have no picture, press this button
and a picture should appear. If you still don't have a picture, press the
button again until you do.

CONNECT POWER

TV ON