Schellenberg TWIN 300 Manual page 17

EC DECLARATION OF CONFORMITY
(in the sense of the EC Machinery Directive 2006/42/EC, annex II, part 1 A)
We herewith declare,
Manufacturer:
Alfred Schellenberg GmbH
An den Weiden 31
57078 Siegen
Managing Director:
Sascha Schellenberg
that the product listed below:
Swing gate drive TWIN 300
corresponds to the fundamental safety and health requirements of the following EC/EU directives/regulations, through its
design and construction in the version marketed by us:
EU Electromagnetic Compatibility Directive 2014/30/EC
EU Directive RED 2014/53/EC
EC Machinery Directive 2006/42/EC
EU Directive RoHS 2011/65/EC
EC Directive WEEE 2012/19/EC"
Utilized as well as applied standards and specifications:
EN 301489-1, EN 301489-3, EN 300220-1, EN 300220-2, EN 60335-1, EN 60335-2, EN 62233, EN 12453, EN 12445
Note: The commissioning of the final product or in combination is prohibited by Alfred Schellenberg GmbH until the conformity
of the end product or a combination of this swing gate drive and gate has been established on the basis of the respectively
applicable standards, specifications or guidelines. In case of doubt, a professional installer should be consulted for this.
The Managing Director of the above mentioned manufacturer is the authorised entity for the compilation of the technical
documentation.
Siegen, May 20, 2016
Sascha Schellenberg
Managing Director
"Confirmation of conformity through the assembly specialist company"
Gate manufacturer / type:
Serial number of the components:
Company: __________________________Date: ________________ Signature / function: __________________________
17