Table of Contents
Advertisement
Replacing the condensation drain
en
Detach the condensation hose from
3.
the socket.
The appliance comes
Note:
delivered with the condensation
hose already fitted to the socket.
Place the condensation hose in the
4.
"parked" position.
Take the drain hose from the
5.
accessories and attach it to the free
socket, pushing it up to the stop.
Secure the other end of the drain
6.
hose in place using the remaining
accessories (depending on the
connection type).
38
Wash basin:
Siphon:
The connection point must be
secured using a hose clamp
(clamping range 12-22 mm).
Floor drain:
Caution!
Risk of material damage due to
leaks or draining water.
Secure the drain hose to prevent it
from slipping out. Do not kink the
drain hose. The difference in height
between the installation surface and
the drain should not exceed 100 cm.
Advertisement
Table of Contents
