Atag WS9111VAM Instructions For Use Manual page 75

INSTALLATION
Assembly
This hood could be heavy, therefore we advise to install this hood with at least two
people.
Fig.1
- Outline the underside of the hood on the
wall, taking into account the minimum
distance between the hood and the hob
(Fig. 1).
Fig.2
- Position the bracket referring to the dimensions in Figure A and secure this with the supplied
screws and plugs (Fig. 2).
Fig.1a
- Place the template on the wall and ensure
that the line corresponds to the line
previously drawn on the wall. Mark the
position of the holes and drill these (Fig.1a).
EN 15