Safety Precautions Safety Precautions Read Operating Instructions Thoroughly Prior to Operation Read Opera�ng Instruc�ons thoroughly prior to opera�on and observe the following safety precau�ons: • Use only a grounded outlet that is rated for your model's electrical requirement. • Do not modify the oven or factory control se�ngs to operate the oven above the stated maximum opera�ng temperature. •...
Page 3
Menu Level Functions Guide To navigate the controller's menu, please refer to the easy-to-use Menu Guide below: Menu setting changes can be done quickly with our 5-button digital microprocessor. Your incubator's controller allows you to easily do the following: Auto-tune your Incubator for maximum efficiency Set the operating set-point temperature Lock the set-temperature Select between degrees Fahrenheit or Centigrade...
Page 4
Auto-tune The control's P.I.D values have been derived from a performed tuning at the factory using the AT-1 option which allows for optimal performance and faster response time. You may, however, choose to tune your incubator to your specific application and/or most used set-point temperature by selecting and performing one of the tuning options shown below.
Page 5
Chamber Loading Understanding the unit's light pressure thermal convec�on and "load-effect" are necessary to op�mize unit performance. Ar�cle or media processing �mes and/or uniformity are largely dependent on load density and posi�oning. Important guidelines to chamber loading and processing: Load the incubator so that air circula�on within the chamber is not impaired. Leave a space between ar�cles on the shelf.
For a complete list of replacement components, part and additional equipment, visit us on the web at www.quincylab.com Technical Support If you have any ques�ons or need technical assistance, contact Quincy Lab technical support for further assistance, or visit us www.quincylab.com on the web at Email: information@quincylab.com...