Advertisement
Available languages
Available languages
Montage-/ Betriebsanleitung
Mounting-/Operation Instruction
EN
Congratulations on your purchase of this nobilé-product!
You have decided on a high-quality product which is manufactured with the utmost care and subject to several quality controls. Safe use of the
product is only guaranteed if each instruction is followed accordingly. In case of damage caused by non-observance of these instructions the
warranty expires. The installation and electrical connection must be done by an authorized expert (e.g. electrician) in compliance with existing
standards and local code. Prior to any installation or maintenance work, mains must be disconnected. Before putting in operation, make sure any
component of the entire installation does not bear a risk of life. According to common practice, please perform a standard function test, before
installing. To make maintenance work possible, the lighting system should be accessible after installation (auditable).
Energy efficiency class of the light source:
LED Pendel-Panel R400
LED Pendel-Panel RT400
Connection Diagram:
Connection for dim Dali
A.
C.
Connection to any desired 1050mA constant current LED driver
LED Pendel-Panel R400 24W
LED Pendel-Panel RT400 UGR19 24W
3000K
Technische und gestalterische Änderungen im Zuge stetiger Produktentwicklungen vorbehalten.
Technical and design changes due to product developments are subject to change without prior notice.
nobilé AG – Wächtersbacher Str. 78 - 60386 Frankfurt/M. Germany - www.nobile.de
4000K
B.
Connection for dim Push
*Do not connect the luminaire to an active LED driver. Some LED
drivers emit high voltage when idle, which may cause permanent
damage to the luminaire. Be sure to disconnect the LED driver
from the power line before connecting the luminaire.
rev. 0.1 – 15.02.2022
Seite 3 von 4
Advertisement
