1. Manuals
  2. Brands
  3. Alcove Manuals
  4. Outdoor Fireplace
  5. Camas 4ND74OMSL0010
  6. Assembly instructions

Alcove Camas 4ND74OMSL0010 Assembly Instructions

32in square fire pit
Hide thumbs
1
2
3

Advertisement

Table of Contents

Warning:

1.
Read and follow all Warnings & Assembly Instructions before attempting to assemble.
2.
For safety reasons, please keep kids and pets away from the construction area of the fire
pit. Children and pets should be supervised when they are in the area of the fire pit
construction.
3.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line, or electrical wires.
4. Some parts may have sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to
the product.
5. Check all bolts for tightness before use, and periodically check and tighten bolts as
necessary.
6. Assemble on level ground.
7. For outdoor use only.
8. Fuels used in wood or charcoal burning appliances, and the products of combustion of such
fuels, contain chemicals known to cause cancer, birth defects or other reproductive harm.
Camas 32in Square Fire Pit
Item# 4ND74OMSL0010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Camas 4ND74OMSL0010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alcove Camas 4ND74OMSL0010

  • Page 1 Camas 32in Square Fire Pit Item# 4ND74OMSL0010 Warning: Read and follow all Warnings & Assembly Instructions before attempting to assemble. For safety reasons, please keep kids and pets away from the construction area of the fire pit. Children and pets should be supervised when they are in the area of the fire pit construction.
  • Page 2 Parts List Description Handle Cover Firedog Bowl Pick Table Top Leg Support Poker Bolt M6x8 Nut M6 Washer M6 Nut M6 Wrench M6 Step 2: Attach Pick (E) on Fire Pit (D) by Bolt (AA) Step 1: Attach Handle (A) on Cover (B) by Nut (BB). and Nut (BB).
  • Page 3 Step 4: Attach Leg Support (H) to Leg (G) by Bolt Step 3: Turn over Table Top (F). Attach Leg (G) to (AA) and Washer (CC). Tighten all the bolts and nuts. Table Top (F) by Nut (DD). Do not tighten the Nuts at this step.

Table of Contents