Advertisement
Effluent Filter Overflow Plate
Assembly Instructions for FT0822-14B-FSO
Before You Begin...
The Effluent Filter Overflow Plate modifies 8-inch Orenco Systems
base-inlet effluent filters* to prevent effluent from bypassing the
filter if the filter becomes clogged.
To assemble, you will need a Phillips screwdriver.
Step 1: Slip the Overflow Plate onto the Sleeve
Slip the overflow plate onto the one-inch diameter sleeve attached to the
coupling.
* Covered by U.S. patents 4,439,323 and 5,492,635
Orenco Systems
, Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com
®
Instructions
Biotube
®
®
1a
1b
NIN-FT-OVERFLOW-1
Rev. 3.0
04/17
©
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for Orenco FT0822-14B-FSO
Summary of Contents for Orenco FT0822-14B-FSO
- Page 1 Slip the overflow plate onto the one-inch diameter sleeve attached to the coupling. * Covered by U.S. patents 4,439,323 and 5,492,635 Orenco Systems , Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NIN-FT-OVERFLOW-1 ® Rev. 3.0 04/17 ©...
- Page 2 Step 3: Replace the Filter in the Housing NIN-FT-OVERFLOW-1 Orenco Systems , Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com ® Rev. 3.0 04/17 ©...
Need help?
Do you have a question about the FT0822-14B-FSO and is the answer not in the manual?
Questions and answers