Bond SKS-500 User Manual
Sidekick for shades
Hide thumbs
Also See for SKS-500:
- Instructions manual (18 pages) ,
- User manual (15 pages) ,
- User manual (14 pages)
Related Manuals for Bond SKS-500
Summary of Contents for Bond SKS-500
- Page 1 User manual Bond Sidekick for Shades Model: SKS-500 Product outline drawings: Olibra Confidential...
- Page 2 ● mix & match shade motor types on a single remote ● multiple channels can be selected and controlled simultaneously ● no hub required, but works seamlessly with Bond Bridge Pro ● securely flush mounts to wall without junction box ●...
- Page 3 431–437MHz Operating Temperature -10C -- +50C Range 300 sq ft Modulations supported GFSK,OOK Parts 1x Bond Sidekick for Shades (SKS-500) 1x CR2430 3V lithium battery 1x mounting bracket 2x mounting screws & matching drywall anchors 1x decorator wall plate 1x user manual...
- Page 4 2. This product is designed to operate motorized shades, awnings, and pergolas. The movement of these shades or awnings may pose a physical threat to people in their vicinity. For this reason, please beware the following: a. Please follow all manufacturer safety instructions regarding the installation, operation, and maintenance of your shade, awning, pergola, or similar appliance.
- Page 5 5 channels before continuing. 2. Press and hold the bond button on the back of the remote control for 2 seconds. 3. The indicator LEDs will blink to indicate the current protocol for these channels. See table below.
- Page 6 Pairing with a Bond Bridge Pro Sidekick can be paired with a Bond Bridge Pro so that the state of your shades does not get out of sync in the app when using Sidekick to control them. Pairing is very easy: 1.
- Page 7 2. Now tap the Up / Down button to Raise / Lower the shade. 3. Tap the STOP button to hold the shade at a specific position. 4. For most shades, tapping the STOP button when the shade is already stopped will cause the shade to move to the Favorite Position.
- Page 8 FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the SKS-500 and is the answer not in the manual?
Questions and answers