Subscribe to Our Youtube Channel
Related Manuals for Opera SR366
Summary of Contents for Opera SR366
- Page 1 IMPULSE AUTO Instructions and for Opera Impulse Auto Hybrid Mattress System ® Opera Care, Azure House, Connaught Road, Hull, HU7 3AP 0333 222 8584 | support@opera-care.co.uk | opera-care.co.uk...
-
Page 2: Table Of Contents
If you do not fully understand all the instructions, safety precautions, and warnings, do not use this device. In case you have questions, please contact Opera Care on 0333 222 8584. Impulse Auto Mattress Instructions and Technical Specification... -
Page 3: Symbols And Indications
1. Explanations of Symbols Conformity mark in accordance with the European Medical Device Directive_93/42/EEC amended by 2007/47/EC Symbol for Type BF Applied Part_Mattress according to IEC/EN 60601-1 Double Insulated (Class II) equipment Read instructions for use Caution Manufacturer Date of Manufacture WEEE Protected against ingress of solid foreign objects ≥12.5mm diameter. -
Page 4: Safety Precautions
Failure to do so could result in serious patient injury or death. If applicable, adhere to facility or local guidelines regarding entrapment regulations. DO NOT Disassemble contact Opera Care on 0333 222 8584. Impulse Auto Mattress Instructions and Technical Specification... -
Page 5: System Package
Incorrect battery replacement may result in risk of explosion. Replace only with same or equivalent battery type recommended by the manufacturer. Maintenance If the equipment needs maintenance, contact Opera Care on 0333 222 8584 as soon as possible. For equipment that is no longer functional, make sure to follow national, state, and/or facility requirements for disposal of the unit. -
Page 6: Features
5. Power Unit Features 1. Power/Mute Press button to turn on the power unit and the green LED will light. The LED will change to orange if abnormal power outage occurs and audible alarm will sound to notify medical staff. You may press button to mute the alarm or it will sound until power is restored or rechargeable battery is discharged. - Page 7 5. Rocker Switch Power unit’s main power switch. 6. Couplers Quick release female couplers are used to secure mattress air hoses to power unit. 7. Power Receptacle Insert power cord set firmly into receptacle. 8. Hanging Hooks Hanging hooks are designed to hang the power unit on almost any foot board.
-
Page 8: Mattress And Power Unit Installations
6. Mattress and Power Unit Installations Remove Existing Mattress Remove existing mattress from bed frame. Secure Mattress Replacement Place mattress replacement on the bed frame with the foot symbol at foot end. Secure the mattress at each side using anchor straps. Ensure that the anchor straps do not interfere with any moving parts of the bed frame before proceeding to the next step. -
Page 9: Program Settings
7. Program Settings Adjusting Firmness Center the patient on the mattress. Adjust the mattress’ internal pressure according to the patient sensation by using the comfort button on the control panel of the the mattress’ internal pressure one increment at a time and wait for the system to stabilize before making another change until a comfortable state is achieved. -
Page 10: Cleaning Instructions
11. Routine Maintenance and Storage needed, contact Opera Care on 0333 222 8584. Only disinfected and dry systems should be stored. Disconnect the air hoses from the power unit. Roll up the mattress starting from the head end and working down toward the foot end. -
Page 11: Troubleshooting
Turn on and operate the unit after failure. power is restored to the facility or home. Power unit does not respond Please contact Opera Care on to possible solutions. 0333 222 8584 for assistance. Low pressure alert Possible control failure. -
Page 12: Returns For Service
13. Returns for Service Service and repair must be performed by an Opera Care authorised technician or representative. Please contact Opera Care on 0333 222 8584. 14. Warranty We warrant the product to be free from defects from the date of purchase. - Page 13 System Name IMPULSE AUTO Hybrid Mattress System Power Unit (Air Pump) Model SR366 Mattress Dimension 2000 x 900 x 150 mm (6” depth) 2000 x 1050 x 150 mm (6” depth) 2000 x 1200 x 150 mm (6” depth) 2000 x 1000 x 150mm (6” depth)
-
Page 14: Emc Declaration
Company Address: Azure House, Connaught Road, HULL, HU7 3AP, UK Trade Name: OPERA SR365 (Opera Flo), SR366 (Opera Flo Auto), Model No.: SR366 (Opera ECLIPSE Auto), SR366 (Opera IMPULSE Auto), SR366 (Opera Flo Digital) Report Number: ETC 19-12-RBO-038 Power Supply: AC 220 - 240V , 50/60Hz , 0.2A... - Page 15 Declaration – electromagnetic emissions and immunity – for EQUIPMENT and SYSTEMS that are use in the professional healthcare facility environment or in the home healthcare environment The Air Pump declaration – electromagnetic immunity The Air Pump system is intended for use in the electromagnetic environment specified below. The customer or the user of the Air Pump system should assure that it is used in such an environment.
- Page 16 Opera Care, Azure House, Connaught Road, Hull, HU7 3AP 0333 222 8584 | support@opera-care.co.uk | opera-care.co.uk U-2S2205-30631-G V1.2...
Need help?
Do you have a question about the SR366 and is the answer not in the manual?
Questions and answers