Page 2
Kontaktinformation Montering av bordet 1. Eftersom bordet är tungt rekommenderar vi att Verktygsboden Erfilux AB två personer lyfter bordet under installationen. Källbäcksrydsgatan 1 SE-507 42 Borås 2. Sätt fast de två distanserna på sidan av Telefon: 033-202650 stativet. Dessa två distanser och skruv används Mejl: info@verktygsboden.se för att stödja bordet med hjälp av skenorna samt hålla det på...
Page 3
Montera dammsugarfäste 1. Dammsugarfästet är monterad på bordet. 2. Fäst damsugarfästet med hjälp av fyra M12 muttrar. Montera mothåll 3. Använd en flexibel slang för att ansluta 1. Sätt ”armarna” i hålen på dammsugarfästet. dammsugare till dammsugarfästet. 2. Använd en öppen nyckel för att dra åt. 4.
Page 4
Installation av fräs 1. Ta hjälp av en vän när du ska installerar fräsen. 2. Luta bordet till 45 ° för att installera fräsen. Lås bordet i det lutande läget genom att förflytta ”banorna” på vardera sida till låst läge. 3.
Contact Assembly of the table PELA Tools 1. As the table is heavy, we recommend that two Solängsvägen 13 people lift the table during installation. SE-513 70 Borås 2. Attach the two spacers to the side of the stand. Phone: 033-202650 These two spacers and screws are used to sup- E-mail: order@pelatools.com...
Install vacuum cleaner bracket 1. The vacuum cleaner bracket is mounted on the table. 2. Attach the vacuum cleaner bracket using four M12 nuts. Install brackets 3. Use a flexible hose to connect vacuum cleaner 1. Insert the ”arms” into the holes on the vacuum for the vacuum cleaner bracket.
Page 9
Installation of cutter 1. Get help from another person when installing the cutter. 2. Tilt the table to 45 ° to install the cutter. Lock the table in the inclined position by moving the ”paths” on each side to the locked position. 3.