Removing From Storage - Chapin 6-9138 Instruction Manual

Important return safety instructions:
When you return your pump for warranty or repair, you must:
1. Flush chemical residue from the pump. Run clean water through the pump for at least 15
minutes if the pump can cycle. If not, rinse thoroughly with hose inside and out.
2. Clearly label the pump with the type of chemicals that have been cycled though the
pump.
3. Include complete description of operation problem, such as how pump was used, symp-
toms of malfunction, etc.
Pumps can contain residues of toxic chemicals. Carefully follow appropriate steps to
protect all of those who handle return shipments, and our lab technicians that evaluate the
isuues with your return.
Please call the Chapin International, Inc. before returning any product.
1-800-950-4458
CAUTION:
DO NOT OPERATE PUMP IN AMBIENT FREEZING TEMPURATURES.
STORAGE
Protect the pump from freezing during storage. Fill pump system with RV antifreeze.
RV antifreeze is the preferable choice. It is biodegradable and generally safer than
most antifreeze solutions. Be sure to spray some through the entire system to ensure
that all components are protected from freezing.

REMOVING FROM STORAGE

Drain unit of all antifreeze. Be sure to safely collect the antifreeze. Flush enitire system
with clean, fresh water until pump is completely clear of antifreeze. Dispose of Anti-
freeze properly according to local code.
4E
Instruction Manual - English