Summary of Contents for Wisco Industries 695D/925 Series
- Page 1 Models 695D/925 Series- Blower Motor Replacement 0022309 *For instructional purposes, model 695D is shown in photos. However, instructions for the 925 series are the same.* FS140138 REV: ORIG Page 1 of 6 7-31-2020...
- Page 2 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove side panel by pushing the graphic panel in gently Remove (8) screws and remove the top. to separate the latches. Then pull the panel up and out. FS140138 REV: ORIG Page 2 of 6...
- Page 3 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove the Air Lid Assembly Remove (4) Screws on top of the Air Lid Assembly FS140138 REV: ORIG Page 3 of 6 7-31-2020...
- Page 4 Models 695D/925 Series- Blower Motor Replacement 0022309 Disconect motor wires (marked by yellow arrows below) FS140138 REV: ORIG Page 4 of 6 7-31-2020...
- Page 5 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove (8) Screws from the motor’s bracket and disassemble the bracket. FS140138 REV: ORIG Page 5 of 6 7-31-2020...
- Page 6 Models 695D/925 Series- Blower Motor Replacement 0022309 Using the new motor, complete all steps in reverse order and you have successfully replaced your units blower motor. Your unit is now ready for operation. FS140138 REV: ORIG Page 6 of 6...