Cannon Tools NEILSEN CT3270 Original Manual

Vertical log splitter

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

VERTICAL LOG SPLITTER CT3270

Beforeoperatingthisappliance,pleaseensurethatyouread&understandall

theinstructionsthatapplytoit,asfailuretocomplywi ththeseinstructions

mayresultinpersonalinjurytootherpersons,andalsoincreasetheriskof

fire.Pleaseensurethatanyreplacementpartsoraccessoriesusedwiththis

appliancearecorrectlyand/orsecurelyfittedbeforeuse.

Pleaseretaintheseinstructionsforconstantreference.

Cannon Tools Limited

Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

ORIGINAL MANUAL

Table of Contents

Summary of Contents for Cannon Tools NEILSEN CT3270

Page 1 VERTICAL LOG SPLITTER CT3270 ORIGINAL MANUAL Beforeoperatingthisappliance,pleaseensurethatyouread&understandall theinstructionsthatapplytoit,asfailuretocomplywi ththeseinstructions mayresultinpersonalinjurytootherpersons,andalsoincreasetheriskof fire.Pleaseensurethatanyreplacementpartsoraccessoriesusedwiththis appliancearecorrectlyand/orsecurelyfittedbeforeuse. Pleaseretaintheseinstructionsforconstantreference. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Page 3 EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.
Page 4: Table Of Contents
TABLE OF CONTENTS Specifications Introduction 6.5HP OHV engine Specifications Max. Power(kW) Symbols Rated Power(kW) Safety Bore × Stroke (mm) 68 * 54 Application Conditions Fuel oil tank volume (L) Unpacking Lube Oil Capacity (L) Contents of Shipping Container Log length (mm) 610-1050 Set up and Preparation for Operation Log dia.(Max)(mm)
Page 5: Safety
Do not touch a hot muffler, gear housing or cylinder. Keep your work space tidy! Untidiness may result in accidents. Caution! Thrown objects. Do not remove or tamper with any protection or safety devices. SAFETY Wear safety footwear. General Safety Rules Understand your machine Wear safety gloves.
Page 6 Dress properly. Wear heavy long pants, boots When refilling or draining the fuel tank, use an and gloves. Do not wear loose clothing, short approved fuel storage container while in a clean, pants, jewelry of any kind. Secure long hair so well-ventilated outdoor area.
Page 7 Machine use and care Keep splitting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges Never pick up or carry a machine while the are less likely to bind and are easier to control. engine is running. Walk,never run with the machine.
Page 8 Inspect your log splitter.Check your log splitter Always pay full attention to the movement of the before turning it on. Keep guards in place and wedge ram. Never attempt to load your log in working order. Form a habit of checking to see splitter while the ram is in motion.
Page 9: Application Conditions
Maintain your log splitter with care. Always clean the unit after each use. Keep the log splitter clean for best and safest performance. Follow instructions for lubricating. Inspect all hydraulic seals, hoses and couplers for leaks prior to use. Control levers and power switch must be kept clean, dry and free from oil and grease at all times.
Page 10: Contents Of Shipping Container
SET UP AND PREPARATION CONTENTS OF THE FOR OPERATION SHIPPING CONTAINER Pull Spring Pin (A) to remove the Lock Pin (B). Apply a thin coat of grease to both surfaces of the Control Lever Guard as illustrated. Insert the Control Lever and Guard Assy and make sure the Control Lever End goes into the slot of Connection Bracket (C).
Page 11 Familiarize yourself with the controls and features of this log splitter in the illustrations. Transport Handle Ram Travel Adjusting Rod Split Wedge Control Levers Connection Bracket Top Motor Shield Oil Tank Wheels Base Oil Tank Cover / Air Bleeder Table Lock Down Hook Support Table Side Bracket for Support Table Front Bracket for Support Table...
Page 12: Delivering Log Splitter To Work Site
LOG SPLITTER FAILED TO LOOSEN THE OIL OPERATION TANK COVER WILL KEEP THE SEALED AIR IN HYDRAULIC SYSTEM BEING COMPRESSED Plan your work site. Work safely and save AFTER BEING effort by planning your work beforehand. DECOMPRESSED. SUCH Have your logs positioned where they can CONTINUOUS AIR be easily reached.
Page 13 Turn the motor on, the wedge ram should rise to the highest position automatically. If the wedge ram is already at the highest position when the motor starts, grip both control levers and lower them, the wedge ram should start to move downward. While operating under extremely low temperature, keep the log splitter running under no load for 15 minutes to preheat the...
Page 14: Replacing Hydraulic Oil
Place log onto splitter. Place the log onto Accumulated split wood and the support table vertically and sitting flat on wood chips can create a the support table. Be sure the wedge and h a z a r d o u s w o r k support table will contact the log squarely environment.
Page 15: Trouble Shooting
TROUBLE SHOOTING PROBLEM PROBABLE CAUSE REMEDY SUGGESTED Engine oil is not enough Filling engine oil Engine does not start Turn the Switch to OFF Turn the Switch to ON Valve is not opened owing to Check and tighten the parts the connection parts loosening Log Splitter does not Control Levers or Connection...
Page 16: Parts Schematic
PARTS SCHEMATIC...
Page 17 EXPLODED DIAGRAM Description Description Worktable Spring washer 8 Four star knob Bolt M8x30 Circulate stem Oil Pump handle jam Oil going pipe spigot for pump Armguard cover 22 Hose Hoop Manipulative handle Inner hexangular screw M8x85 Right log clamp Suction hose spigot for pump Right armguard hold assembly Washer groupware 20 Star model knob...
Page 20 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...