Snooze Function; Sleep Timer Setting - Currys CCRAN10 Instruction Manual

2. For Radio Alarm
First tune in to a desired station (see Radio Reception on the
next page) and then adjust the volume. Set the FUNCTION
button to RADIO ALARM.
For Buzzer Alarm
Set the FUNCTION button to BUZZER ALARM.
3. The alarm indicator will illuminate. The unit will wake up to "Radio" or "Buzzer" when the
alarm timer reaches the preset time and then shut off automatically after one hour and 59
minutes.
After setting the alarm, you can press the ALARM button to view the set alarm time.

Snooze Function

Press the SNOOZE button when the RADIO or BUZZER sounds. The alarm will go off and will
then sound again in approximately 9 minutes.
To turn off the alarm, press the ALARM button when the RADIO or BUZZER sounds. The alarm
function will still be active the next day.

Sleep Timer Setting

This function automatically switches the unit to standby after the preset time has elapsed.
Switch the FUNCTION button to OFF, BUZZER ALARM or RADIO ALARM first to set sleep
timer.
• Press the SLEEP button once, the radio turns on and it will turn off after 59 minutes.
• Press and hold the SLEEP button while at the same time pressing the HOUR button / MIN
button repeatedly to adjust the hour / min digits. The sleep timer will be confirmed when
you release the buttons. The time begins to count down from the preset time. (Maximum
sleep timer setting is up to an hour and 59 minutes).
• Press the SNOOZE button to turn off the sleep timer.
CCRAN10_IB_final110512.indd 9
9
12/05/2011 11:13 AM