Page 1 Desktop POS Printer TP700 User Manual...
Page 2: Table Of Contents
4.4 Connecting the Interface Cable....................18 4.5 Connecting the Cash Drawer....................18 4.6 Paper roll installation......................19 4.6.1 Confirm print paper.....................19 4.6.2 TP700 installation/change Paper.................20 4.7 Setting DIP switch........................22 4.7.1 Serial Interface (RS-232C)....................22 4.7.2 Interfaces of USB and Ethernet................... 23 4.7.3 Auto cutter enable/disable selection................25 4.8 Print self-testing........................
Page 3 8.5.2 Printer properties......................71 8.6 Uninstall Windows Driver.......................74 9 Utility Tool For POS Instruction......................76 9.1 Utility Tool Installation ......................77 9.2 ADLER Utility Tool Using......................80 9.2.1 Add/Modify/Delete/Connect Printer................80 9.2.1.1 Add printer....................... 80 9.2.1.2 Modify printer....................82 9.2.1.3 Delete printer....................84 9.2.1.4 Connection Test....................85...
Page 4: Cautions
TP700 User Manual CAUTIONS Warnings : This must be complied with in order to avoid any damage to the human body and to the equipment. This is showing the important information and tips for the printer operating. Note ： Due to continuous improvement of our product, the description of printer specification, accessories, design in this manual may slightly different, please take in kind prevail.
Page 5: Important Safety Instructions
TP700 User Manual Important Safety Instructions 1. Safety warning Warnings: The print head will become very hot during printing; avoid contact with the print head after printing has finished. Warnings: Do not touch the print head and connector in case static damages the print head.
Page 6: Pos Printer Packing-Case
TP700 User Manual POS printer packing-case Please check you get all in carton. Notes: ► The AC adapter and power cord vary by local or region. ► The packing materials are actually dependent on the order.
Page 7: Overview
1 Overview 1.1 Introductions TP700 is a thermal receipt printer with auto-cutter, featured by high printing quality, high printing speed, high stability, etc. It can be used in commercial POS system, food industry and applications which need real-time field print receipts.
Page 8: Specifications
TP700 User Manual 2 Specifications 2.1 Printer specification Table2-1 General Specification (1/2) Model TP700 Print method Direct thermal line printing Resolution 203/180DPI Print width 72mm/48mm Printing Parameter Print speed 200～250mm/s Interface USB, cash drawer, serial, Ethernet and power supply Print density...
Page 9 TP700 User Manual Table2-1 General Specification (Continued) (2/2) Model TP700 Power LED Green LED Paper LED Red LED LED Indicator Error LED Red LED Charging External power adapter Power Supply Input AC100V-240V 50-60HZ 2.5A Output Paper type Specified Thermal Paper ...
Page 10: Printing Media Specification
TP700 User Manual 2.2 Printing media specification 2.2.1 Continuous thermal paper specification  Paper type: specified thermal paper  Paper width:      Paper outer diameter: Max. 83 mm  Paper roll core: internal diameter: 12mm Outer diameter: 18mm ...
Page 11: Printing And Cutting Position
TP700 User Manual 2.3 Printing and cutting position 2.3.1 Printing position  mm Print Paper  mm Print Paper 2.3.2 Cutting position Figure 2.3.2 Type Paper Cutting Position(L1) TP700 11.8mm...
Page 12: Printer Components
TP700 User Manual 3 Printer Components 3.1 Appearance and component Note: The views above are for your reference. Ports may vary.
Page 13 If there is an abnormal phenomenon and error LED flashing, it means the printer is in the wrong status. Please turn off the power immediately. 6) Paper guide Paper guide can change the position to adapt to different paper width. TP700 storehouse has 4 paper guide slot. Paper guide slot 1/4 adapt to  ...
Page 14: Specification Of Indicated Light And Beeper
TP700 User Manual 3.2 Specification of Indicated light and beeper Function specification of Indicated light and beeper Name Status Specification POWER LED Bright The printer work well （Green） Extinguish The printer does not work ERROR LED Flashed The printer in an error state （Red）...
Page 15: Printer Packing
TP700 User Manual 4 Printer Packing 4.1 Open packing When opening the package, according to the packing list to check if items are missing or damaged, if so, please contact the dealer or manufacturer. 4.2 Choose installation site and direction of printer 1) The printer should install at a flat and steady place.
Page 16 TP700 User Manual The plug of AC adapter is designed in a switch type, when accessing AC adapter and uttered the voice "click", it means the connected socket switch is locked the adapter connect well, otherwise please connect again. When pulling out the adapter, please pinch the shell of AC adapter and pull the switch up, when the switch is fully opened then pull out the AC adapter.
Page 17 TP700 User Manual Notes ： ► Please only use the AC adapter recommended by supplier or equivalent products. ► When disconnecting the AC adapter plug, handhold plug connector housing to avoid the pulling on the cable in force. ► Avoid dragging the AC adapter cable, otherwise it will damage the cable, causing fire and shock.
Page 18: Connecting The Interface Cable
TP700 User Manual 4.4 Connecting the Interface Cable 1) Make sure the printer's power switch is turned off. 2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug. 3) Connect the other end of the interface cable to the host.
Page 19: Paper Roll Installation
TP700 User Manual 4.6 Paper roll installation After connecting the AC adapter and interface cable, you can install media for printing. Confirm the type of paper used by the printer before printing. The default paper type is specified thermal paper.
Page 20: Tp700 Installation/Change Paper
4.6.2 TP700 installation/change Paper 1) Turn off printer power supply. 2) Pressing the open button, open the top cover of TP700（Like figure 4.6.1） Figure 4.6.1 3) Put the paper into printer. Pay attention to the direction of the paper.（Like figure 4.6.2）...
Page 21 TP700 User Manual 4) Close the top cover of TP700.（Like figure 4.6.3） Figure 4.6.3 5) Tear the redundant paper.（Like figure 4.6.4） Figure 4.6.4 Notes ： ► According to the paper size to adjust the paper guide. ► Make sure the paper inside is at tight status, or it will tissue paper or other obstacle.
Page 22: Setting Dip Switch
TP700 User Manual 4.7 Setting DIP switch 4.7.1 Serial Interface (RS-232C) DIP switch 1 Switches Functions Default Automatic line feed Enable Disable Handshake XON/XOFF DTR/DSR Bit length 7 bits 8 bits Parity check Parity selection EVEN Baud rate selection Reference form 1 （bps）...
Page 23: Interfaces Of Usb And Ethernet
TP700 User Manual 4.7.2 Interfaces of USB and Ethernet DIP switch 1 Switches Function Default Automatic line Enable Disable feed Reserve 1-2～1-8 DIP switch 2 Switches Functions Default Chinese/English mode English Chinese Internal beeper control Disable Enable Auto cutter Disable...
Page 24 TP700 User Manual Form 1—Baud Rate Selection Baud rate Default 2400 4800 9600 19200 9600 38400 57600 115200 Form 2—Print density Selection Printer Default density 1（diluted） Reserve Reserve Reserve 4（dense） Reserve...
Page 25: Auto Cutter Enable/Disable Selection
TP700 User Manual 4.7.3 Auto cutter enable/disable selection DIP Switch setting 2 Auto cutter disable Switch2-3 Auto cutter enable Application program Ignore auto cutter error for continuous printing 4.8 Print self-testing 1) Make sure the printer has been installed paper roll and turn off the top cover.
Page 26: Interfaces Signal
TP700 User Manual 5 Interfaces Signal Printer TP700 supports cash drawer interface and many other various communicate interfaces, such as Serial interface, USB interface, and Ethernet interface. The printer has the communication board with the default USB interface and cash drawer interface, and the other communication boards with the Ethernet interface, and RS232 interface are optional.
Page 27: Cash Drawer Interface Signal
TP700 User Manual 2) Interface type Printer end-Unetop DC-002 or similar products, user end-Unetop DC-002 or similar products 5.3 Cash Drawer interface signal Electrical characteristics Driving voltage：DC 24 V  Driving current：maximum 0.8 A ( In 510 ms)  Drawer check signal：“L” = 0～0.5 V “H”...
Page 28: Serial Interface And Ethernet Interface
TP700 User Manual 5.4 Serial interface and Ethernet interface Printer TP700 serial interface is compatible with RS-232 standard, with 9 pin (D hole type) socket. Serial interface definition Ethernet interface definition Signal definition PIN No. Signal definition PIN No. PIN 1...
Page 29: Troubleshooting
TP700 User Manual 6 Troubleshooting Your printer is very reliable, but occasionally problems may occur. This chapter provides information on some common problems you may encounter and how to solve them. If you encounter problems that you cannot resolve, contact your dealer for assistance.
Page 30: Troubles Occur During Printing
TP700 User Manual 6.3 Troubles occur during printing Problem description Probable reason Solution Coloured stripe in the paper Paper near end Reinstall the roll paper Incorrect roll paper installation Check if the roll paper is installed Unqualified roll paper Use recommended thermal roll paper...
Page 31: Removing Jammed Paper
2) Remove jammed paper, reload the roll, and close the cover. Figure 6.5.1 If the auto cutter jam occurs on printer TP700 and you cannot open the printer cover, open the cutter cover as shown on the left below. 1) Turn the printer off and open the front cover.
Page 32: Printer Cleaning And Maintenance
TP700 User Manual 7 PRINTER CLEANING AND MAINTENANCE Print quality might be degraded by dust, foreign substance, adhesive substance, or other pollution materials stuck in the printer head or inside the printer. When dirty, clean the print head as follows: ※...
Page 33: Windows Driver Manual
 Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)  8.3 Windows Driver Preparation The Windows Driver is included in the enclosed CD. The installation file name is Adler TP700 POS Printer Driver-v-X.X.X.X.exe eg. : Adler TP700 POS Printer Driver-v-2.6.5.0.exe...
Page 34: Windows Driver Installation
8.4 Windows Driver Installation Warning: Under different operating system, the screen has slight difference. Please operate it according to the tips. Take TP700 (Windows 7) as example. 1) Double click Windows Driver. 2) Select Setup Language, choose “English” and click “OK”...
Page 35 TP700 User Manual 4) Click "Next" 5) Choose the matched type and port (USBxxx is for USB port, COMx is for serial port, LPTx is for parallel port). Choose the type and port of driver, such as "TP700", "COM1". Click "Next".
Page 36 TP700 User Manual Note: If printer is already connected with computer by USB port, it only needs to click "Install", then it will be installed automatically. Otherwise, proceed to the next step. 6) Click "Finish". POS printer driver is installed successfully.
Page 37: Windows Driver Setting Detail
TP700 User Manual 8.5 Windows Driver Setting Detail 8.5.1 Printing Preferences 1) Click "Start"→"Devices and Printers". Right click "TP700" and choose "Printing preferences". 2) According to the different needs, choose "Paper"\"Offset"\"Rotate"\"Effect"\ "Copies" in "Page".
Page 38 TP700 User Manual ① Paper ② Offset ●Click on "Manager", add or delete paper.
Page 39 TP700 User Manual ●Click on "Advanced" to set "Save Paper", "Cut Paper", "Feed Paper", "Cash Drawer", "Custom Command", "Logo", "Buzzer", "Code Page". ￭Save Paper...
Page 40 TP700 User Manual ￭Cut Paper Cut Distance: 0/5/10/15/20mm (End Document)
Page 41 TP700 User Manual ￭Feed Paper Feed Mode: Feed Automatically/Cut Automatically/Cut Automatically PerPage/None Feed Distance: 0/5/10/15/20mm (End Document)
Page 42 TP700 User Manual ￭Cash Drawer...
Page 43 TP700 User Manual ￭Custom Command ￭Logo...
Page 44 TP700 User Manual Note: This setting needs to be set in utility, here are the steps. ① Open the utility and click "Manage Images".
Page 45 TP700 User Manual ② Click “Download”. ③ Click "Add" to add a logo. (BMP format is recommended)
Page 46 TP700 User Manual C:\Users\1993\Desktop\01.bmp ④ Select the print location, and then click "Download mode of G". (Such as: left print) ⑤ Return to image list to view the image number. Note: Each time click "Download mode of G", an image list number will be generated.
Page 47 TP700 User Manual ⑥ Select Printer properties in Devices and Printers, then click “Preference”.
Page 48 TP700 User Manual ⑦ Click the “Advanced”, then click “Logo”.
Page 49 TP700 User Manual ⑧ Set the printing time to print and click "OK". (Such as: Start Document) ⑨ Return to the logo setting in driver, also select "Print left".
Page 50 TP700 User Manual ⑩ Set the key Code according to the image number. (Such as: 0 0) ⑪ Then click “OK”.
Page 51 TP700 User Manual ⑫ Click “Print Test Page” to view the printing effect.
Page 52 TP700 User Manual ￭Buzzer Buzzer times: 0/1/2/3/4/5 Buzzer Duration: 0.0/0.5/1/1.5/2/2.5/3.0 Sec Buzzer Interval: 0.0/0.5/1/1.5/2/2.5/3.0 Sec Note: This setting must be operated in Utility.
Page 53 TP700 User Manual ￭Code Page 3）Click "Watermark". Set watermark to print. BMP format is recommended.
Page 54 TP700 User Manual 4）Click "Halftone" to set the halftone.
Page 55 TP700 User Manual...
Page 56 TP700 User Manual 5）Set up the “Barcode” Assuming the font type of the main document is “Italics”, if you want to convert the data “123456”to the barcode printing, the steps are as follows: ● Sets the data "123456" font type to a different font from the main document. Such as: Arial.
Page 57 TP700 User Manual ● Open the Preference If the document is open, you can set it in the document: file-print-preferences.
Page 58 TP700 User Manual ① Add Barcode firstly.
Page 59 TP700 User Manual ② Set the “Font Name” and the “Barcode Option”.
Page 60 TP700 User Manual ③ Click the “Printer Setting”. ● Choose the “Display Language for Properties”...
Page 61 TP700 User Manual ● Turn on the “Font Substitution”, select the system text need to be replaced (for example, Arial), and then select the font you want to replace (for example, 01) and click “Set”, and the replacement font will display "01".
Page 62 TP700 User Manual...
Page 63 TP700 User Manual...
Page 64 TP700 User Manual...
Page 65 TP700 User Manual ● If you do not have a barcode set, the action is as follows: ① Suppose you change the size of the data "123456", for example: ② Set the Printing preferences...
Page 66 TP700 User Manual ③ Click the “Printer Setting”. ● Choose the “Display Language for Properties”. ④ Turn on the “Font Substitution”.
Page 67 TP700 User Manual ⑤ Select the “System Font”, for example: Arial.
Page 68 TP700 User Manual ⑥ Select the font to that you went to replace.
Page 69 TP700 User Manual ⑦ Click “Set”.
Page 70 TP700 User Manual...
Page 71: Printer Properties
TP700 User Manual 8.5.2 Printer properties 1）Click "Start"→"Devices and Printers". Right click "TP700" and choose "Printer properties". 2）Choose "General", click on "Print Test Page", then it will print the current settings.
Page 72 TP700 User Manual 3）Set the "Ports".
Page 73 TP700 User Manual 4）Click "Advanced" to set the printing time.
Page 74: Uninstall Windows Driver
TP700 User Manual 8.6 Uninstall Windows Driver 1）Double click Windows Driver. 2）Choose "Uninstall printer driver", then click "Next".
Page 75 TP700 User Manual 3）Choose "TP700", then click "Next".
Page 76: Utility Tool For Pos Instruction
TP700 User Manual 9 Utility Tool For POS Instruction ADLER Utility Tool is applicable to the following operating system: Microsoft Windows 10 (32 bit/64 bit)  Microsoft Windows 8 (32 bit/64 bit)  Microsoft Windows 7 SPI (32 bit/64 bit) ...
Page 77: Utility Tool Installation
TP700 User Manual 9.1 Utility Tool Installation 1) Open the installation package. 2) Click “Next”.
Page 78 TP700 User Manual 3) Select destination location to install the ADLER Utility Tool. Click “Next”. 4) Select start menu folder. Click “Next”.
Page 79 TP700 User Manual 5) Click “Install”. 6) Click “Finish”. ADLER Utility Tool is installed successfully.
Page 80: Adler Utility Tool Using
TP700 User Manual 9.2 ADLER Utility Tool Using 9.2.1 Add/Modify/Delete/Connect Printer Warning:In different operating system,screen has slight difference.Please operate it according to the tips. Take TP700 (Windows 7) for example. 9.2.1.1 Add printer 1) Click ”Add Printer”.
Page 81 TP700 User Manual 2) Choose the appropriate printer type and port. Then click “OK”. (Take TP700 for example.)
Page 82: Modify Printer
TP700 User Manual 9.2.1.2 Modify printer 1) Choose the printer you want to modify in the list. Click “Modify Printer”.
Page 83 TP700 User Manual 2) Choose the new printer and new port. Then click “OK”. 3) The new printer is added successfully.
Page 84: Delete Printer
TP700 User Manual 9.2.1.3 Delete printer 1) Choose the printer you want to delete in the list and click “Delete Printer”. 2) Click “Yes”, then the printer is deleted.
Page 85: Connection Test
TP700 User Manual 9.2.1.4 Connection Test Make sure printer is connected to computer and it is powered on. 1) Choose the printer. Click “Connection Test”.
Page 86 TP700 User Manual 2) If the connection is successful, it will appear the following window. If the connection is unsuccessful, please connect the printer with computer. Notes: ► Make sure printer is connected with computer and power on. ► Make sure printer is loaded with paper.
Page 87: Functions
TP700 User Manual 9.2.2 Functions Printer Test contains the following items:  Printer Test  Command Test  Manage Images  Download Image in Compatible Mode  Code Page Setting  Download Fonts  Parameter Setting  Advanced Settings...
Page 88: Printer Test
TP700 User Manual 9.2.2.1 Printer Test 1) Self Test Click “Self Test” to see if the printer will print properly. 2) Cutter Test Click the cutter test and the paper will be cut automatically. Cutting method is half-cutting (half- cutting: Not all cut off, between the two sheets of paper to leave a connection point).
Page 89 TP700 User Manual 3) Print Test Text Click "Print Test Text", input the text you want to print. When you click "Print", the printer starts printing text content. Such as: Print Text Test. Note: The language option in the lower right corner is checked according to the input text. (For...
Page 90 TP700 User Manual 4) 2D Code Click the QRCode mode. ▲Model: 1~2 ▲Module size: 1~16 The larger the module value, the larger the printed QR code is, and the smaller the opposite. ▲Error correction level: 7%~30% The higher the error correction level, the more intensive the module graphics.
Page 91 TP700 User Manual Click the PDF417 mode. ▲Columns: 0~30 ▲Rows: 0~90 ▲Width of the module: 2~6 The larger the module value, the wider the width of the printed PDF417 barcode, and the smaller the opposite. ▲Row height: 2~8 The larger the module value, the...
Page 92: Command Test
TP700 User Manual 9.2.2.2 Command Test In the command test, you can send command to the printer. Input text or hexadecimal data. Select a file or enter a command in the input box. 1）Click “Send by Text”, input text content.
Page 93 TP700 User Manual ▲Sending Recycle: When the interval is set to 3000ms (you can set the interval as needed), then click “Send”, the printer starts to recycle printing. Click “Stop” to stop the recycle printing.
Page 94 TP700 User Manual 2）Click “Send by Hex”, input the content. (Convert text to HEX or send ESC command)
Page 95: Manage Images
TP700 User Manual 9.2.2.3 Manage Images...
Page 96 TP700 User Manual 1) Click "Download" to add the image, if you want to print the picture, set the print location before clicking "Download mode of G" to print the picture. (It is recommended to use a picture in BMP format)
Page 97 TP700 User Manual C:\Users\1993\Desktop\01.bmp Note: Total memory 256K, each bitmap should be below 40K.
Page 98 TP700 User Manual 3) Delete Image. Note: Each time click "Download mode of G", an image list number will be generated. Click the image list, select "Delete selected image" will delete the image, click "Delete all Images", without clicking the list option to delete all the images in the list.
Page 99: Code
TP700 User Manual 9.2.2.4 Code Page Setting Select the code page from the list and click “Set”. Note: This code page is only valid in multiple languages.
Page 100: Download Fonts
TP700 User Manual 9.2.2.5 Download Fonts Select the font from the existing file and click "Download". Note: After downloading the font successfully, you need to restart the printer before using...
Page 101: Parameter Setting
TP700 User Manual 9.2.2.6 Parameter Setting You can set Arabic Character Transform (for example: WPC1256).
Page 102: Advanced Setting
TP700 User Manual 9.2.2.7 Advanced Setting Advanced Settings contain following items. Click the button and printer will execute the appropriate action. The change will take into effect after restarting the printer.
Page 103 TP700 User Manual  Function Setting Choose the item and click “Setting”.
Page 104 TP700 User Manual ● Long Beeping After Cutting: ① Disable: there is no sound after cutting ② Use printer buzzer (The beeping time, times and interval time can be set for what you want, such as 2 milliseconds, 3 milliseconds or 4 milliseconds, etc.): The following setting is set as an example: When cutting one piece of paper each time, the printer will emit the “Beep”...
Page 105 TP700 User Manual  Reduction Paper Setting Choose the item and click “Setting”.  DIP Setting Click "Read" to get the printer parameters, click "Write" to send the modified parameters to the printer.
Page 106 TP700 User Manual After the serial port parameter is set, click "Write". Note: When DIP setting is set in soft, the DIP switch in the bottom of printer is disable. After setting the DIP successfully, you need to restart the printer before using it.
Page 107 TP700 User Manual ● Printer hardware setting 1）Print Density: Light, Medium, Standard, Dark (default "standard" level) The print density value varies according to the paper material and it can be adjusted to suit your needs. 2）DIP Mode: 180/203DPI (default "203 DPI") The printer supports both of these resolutions.
Page 108 TP700 User Manual ● Modify the COM setting 1）After setting the parameters as required, click "Write" and restart the printer. 2）After restarting the printer, open the main menu screen of the tool and click "Modify Printer". 3）Select the port category "COM" and set the baud rate to the value "57600" as shown above,...
Page 109 TP700 User Manual  Paper Width Setting Choose the item and click “Setting”. ① 58mm（360dot） ② 58mm（384dot） ③ 58mm（416dot） ④ 80mm（512dot） ⑤ 80mm（576dot） Note: Select the paper width above according to the paper print width.
Page 110 TP700 User Manual  Ethernet Setting This mode is divided into “Auto Assignment IP” and “Static IP Mode”, select one of the modes to connect as needed. Note: IP addresses can be obtained from the Self-test page. ● Static IP Mode 1）Change the printer IP address so that the printer IP address (such as: 192.168.0.33) is the same...
Page 111 TP700 User Manual Figure ￭ Printer IP Address Figure ￭ Host IP Address...
Page 112 TP700 User Manual Figure ￭ Host IP Address 2）Set the same network segment. Figure ￭ Printer IP Address...
Page 113 TP700 User Manual ● Auto Assignment IP This mode automatically assigns the IP address to the printer. When the settings are complete, click "Write", then restart the printer.
Page 114 TP700 User Manual  USB Port Setting Click "Virtual serial port" setting and restart the printer.
Page 115 TP700 User Manual ● Check the Virtual Serial Port 1）Right-click the computer and select “Manage”. 2）Click "Device Manager" to view the virtual port. (such as: COM7).
Page 116 TP700 User Manual 3）Return to the printer utility and click "Modify Printer".
Page 117 TP700 User Manual 4）Change the port to "COM7".
Page 118 TP700 User Manual  Black Mark Setting When using black mark paper, the black mark can be set, and the printer will automatically locate the black mark position. 1）Print start position (>=-14mm) >=14mm: the start position of printing is at least 14mm from the bottom edge of the black mark paper.
Page 119 TP700 User Manual  Bluetooth Setting When the "simple pairing" is checked, the printer does not need to enter the Bluetooth password to connect, when the "simple pairing" is not checked, the printer needs to enter a Bluetooth password to connect.
Page 120 TP700 User Manual  Cut Paper Config 1）Cut paper after the cover is closed: the printer automatically cuts the paper after closing the cover. 2）Do not cut paper after the cover is closed: the printer does not automatically cut the paper after closing the cover.
Page 121: Firmware Update
TP700 User Manual 9.3 Firmware Update 1）Click “FW Update”.
Page 122 TP700 User Manual 2）When the device appears "Printer", select the Dfu file. 3）Click “Update”. 4）Update success! 5）Restart the printer.

Adler TP700 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Adler TP700

Summary of Contents for Adler TP700

Table of Contents