USER MANUAL SAFETY NOTICE CLASS III SYMBOL A Class III appliance is designed to be supplied from a separated/safety extra-low voltage (SELV) power source. The voltage from a SELV supply is low enough that under normal conditions a person can safely come into contact with it without risk of electrical shock.
• USB-C connector to recharge the battery. • Non slip surface. Note: The Killswitch will not connect to the app when another device is connected, and cannot be controlled via the Darklab app. It’s only meant to link the device.
When device finds killswitch the led turns device to toggle power. blue and when its verified that the device found the killswitch, it will flash green once and then each tap Button operation: will be blue to verify connection.
HANDY TIPS The following tips will help you get the most out of your Killswitch and avoid potential issues: • Only use approved power adapters, failure to do so can void your warranty.
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126 2.- Firmware It’s important to keep the firmware on your Killswitch updated. Download the Darklab App for your I phone to receive updates and notifications about software updates. For service inquiries, please contact service@fkirons.com.