Table of Contents
Advertisement
Quick Links
Assembly Manual
Safety Bumper SB/BK and SB/W (NO/contact)
Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact)
1 (12)
Mayser GmbH & Co. KG
Postfach 1362
Foam technology
D-88153 Lindenberg
Telephone:
+49 (0) 83 81 / 5 07 - 0
Fax:
+49 (0) 83 81 / 5 07 - 1 01
Safety technology
Rev.1 140805js
E-mail:
bumper@mayser.de
Internet:
mayser-sicherheitstechnik.de
Advertisement
Table of Contents
Related Manuals for MAYSER SB/BK
Summary of Contents for MAYSER SB/BK
- Page 1 Safety technology Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 1 (12) Rev.1 140805js Mayser GmbH & Co. KG Postfach 1362 Telephone: +49 (0) 83 81 / 5 07 - 0 E-mail: bumper@mayser.de...
-
Page 2: Table Of Contents
Any violation will result in liability for damages. All rights reserved in the case of patent, utility model or design registration. © Mayser Lindenberg 2014 Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 2 (12) Rev.1 140805js... -
Page 3: About This Assembly Manual
1 About this Assembly Manual This Assembly Manual is an integral part of the product. Mayser GmbH & Co. KG will assume no liability and provide no guarantee whatsoever for damages and consequential damages resulting from failure to comply with the Assembly Manual. -
Page 4: Product Safety Information
Applied standards: see EC Declaration of Conformity C3002-0 • This Installation and Assembly Manual was created based on EN 62079 “Creation of manuals – Structure, contents and presentation”. Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 4 (12) Rev.1 140805js... -
Page 5: Technical Data
Do not stand under suspended loads. 4.2 Storage Store safety bumpers in the original package, in a dry place. Observe the storage temperature specified in the technical data. Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 5 (12) Rev.1 140805js... -
Page 6: Assembly
Always take care not to damage the safety bumper during transport. Place the safety bumper on a level, clean and dry surface. Do not use the connecting cable of the safety bumper as a carrying handle. Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 6 (12) Rev.1 140805js... -
Page 7: Assembly
Trim the cables if required. If no plugs or plug sockets (optional) are available, double insulate soldering points and seal with shrink tubing. Only extend cables with double-insulated cables with short-circuit protection. Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 7 (12) Rev.1 140805js... - Page 8 Specifics: • 2 cable outlets • Clamped connections 1 2 3 4 5 6 7 8 9 10111213141516 (on site) • Connection plug (optional) bl br Fig. 5.4-1 Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 8 (12) Rev.1 140805js...
- Page 9 2 (-) (ws) 2 4 (sw) (sw) 4 2 (sw) (br) 1 3 (bl) (bl) 3 1 (br) (br) 1 3 (bl) (bl) 3 1 (br) Fig. 5.4-4 Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 9 (12) Rev.1 140805js...
-
Page 10: Check Function
If the resistance measurement does not give the required values, this may be caused by the following: The cables of the individual bumpers are not correctly connected • The cables are kinked or damaged • Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 10 (12) Rev.1 140805js... -
Page 11: Maintenance And Cleaning
Conduct the inspection carefully. If there is any doubt, the components must be replaced, since a malfunction can result in personal injury and material damage. Recommended inspection interval: Daily function check Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 11 (12) Rev.1 140805js... -
Page 12: Cleaning
Comply with all relevant national disposal regulations and legal requirements. Provide the above list of materials to a disposal company commissioned with disposal of the product. Recycle or dispose of materials in an eco-friendly manner. Assembly Manual Safety Bumper SB/BK and SB/W (NO/contact) 12 (12) Rev.1 140805js...
Need help?
Do you have a question about the SB/BK and is the answer not in the manual?
Questions and answers