Contents Safety Precautions ---------------------------------------------------------------------- Product Overview ------------------------------------------------------------------------ Package List --------------------------------------------------------------------------------- Use Instructions -------------------------------------------------------------------------- About Recharging ------------------------------------------------------------------------ 1. How to Recharge the Hair Clipper ------------------------------------------------------- 2. Important Recharging Safety Instructions --------------------------------------------- Cutting-length Setting --------------------------------------------------------------- 1. Preparations Before Use ------------------------------------------------------------------- 2. Mount the Guide Comb -------------------------------------------------------------------- 3.
Safety Precautions Please do not disassemble the clipper without authority. The clipper can not be washed. Please keep it away from any liquid. 40° 0° The clipper can ONLY be cleaned with a slightly moist cloth or with a mild soap solution.
Product Overview Bottom Blade Top Blade Taper Lever ON/OFF Switch LED Display Screen Guide Combs 3 mm 6 mm 10 mm 13 mm 16 mm 19 mm 22 mm 25 mm Hair Clip Long Comb Hair Cutting Cape Cleaning Blade Oil USB Cable Brush - 2 -...
Package List Note: When unpacking the product, please check if the product and accessories are intact carefully. If there is anything damaged or missing, please don�t hesitate to contact us. 1* Hair Clipper 8* Guide Combs 1* Blade Oil 1* Cleaning Brush 1* Hair Clip 1* USB Cable 1* Long Comb...
About Recharging 1. How to Recharge the Hair Clipper Insert the charger into the bottom of the hair clipper, and plug it into the power outlet for charging. The charging indicator on the clipper will light up, which means the clipper is charging normally.
About Recharging 2. Important Recharging Safety Instructions The product must be recharged at the right voltage, and must not be charged with a charger exceeding the indicated voltage. Otherwise, it may damage the product or burn the internal PCB out, resulting in personal injury or fire. This product is equipped with a USB cable, which needs a specific adapter.
Cutting-length Setting Guide Combs: With 8 guide combs (3 mm, 6mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm), the hair cutting length can be controlled as desired. Taper Lever: Adjust the length of the blades. (Adjustment Range: 0.3-2mm) The hair cutting lengths of using different guide combs are as follows. Guide Combs (mm) Hair Cutting Length (mm) 10-12...
Cutting-length Setting 2. Mount the Guide Comb Align the guide comb with the blade edge. Push it forward slightly to mount it. Note: Please make sure that the guide comb is assembled tightly. If not, it may be loose or come off. 3.
Assembly of the Blades Loosen the blade screws and adjust the blades as shown in the above right figure. The top blade teeth should stretch forward about 0.45-0.8mm than the bottom blade teeth, which can ensure the ideal hair cutting length. The leftmost tooth of the top blade must cover the leftmost tooth of the bottom blade.
Blades Alignment If the blades are not aligned correctly, add a few drops of oil to the blades, turn the clipper on for a few minutes, and then turn it off and unplug it. Loosen the screws slightly and make some adjustments, and tighten the screws after the blades are aligned.
Troubleshooting Analyses Problems Solutions Please purchase new original blades The blades have reached for replacement or contact customer their limited service life. service for assistance. There is hair accumulation Please use the cleaning brush The blades become blunt. inside the blades. / provided to clean the hairs inside the The blades have not been blades.
Troubleshooting Analyses Problems Solutions It is recommended to push the power switch several times before The product has been left The power switch cannot use so that the power switch can unused for a long time. work normally. work normally. Please contact customer service for The power switch is damaged.
Product Disposal Products and batteries marked with this symbol must not be disposed of with normal household waste, which contain materials that can be recovered or recycled reducing the demand for raw materials. Used products with batteries should be taken to a recycling station and not be disposed of with household waste.
Warranty Information Warranty Period: This product is warranted to be free from defects in materials and workmanship for a period of (1)ONE YEAR for the hair clipper except blades from the date of original purchase. Note: The blades and other accessories are not covered by the warranty. This Warranty SHALL NOT be Applicable in the Following Cases: Accident, misuse, abuse, or alteration of the product;...
Disclaimer The product is produced through strict quality management and inspection. If any malfunction occurs in normal use, the consumer can enjoy free warran- ty service with the warranty card in the purchasing store or our repair center. (The battery and blades are consumables, which are not covered by the warranty but can be purchased separately.) The product is only guaranteed when provided with the warranty card instead of the invoice.
Contact Us If you encounter any problems when using the product, please feel free to contact us through the following methods or scan the QR code to get a quick response and a satisfactory solution. If you have any questions about the warranty service, please don�t hesitate to contact us.