3form LightBox Quick Start Manual

page of 15

/ 15
Bookmarks

Quick Links

Download this manual

Backlighting

LightBox

3form LightBox is a pre-configured backlighting solution for signature 3form material. The innovative LED illumination source

eliminates hot spots while requiring minimal space between the light source and the 3form material. Offered in a standard square

module, 3form LightBox easily configures to any custom pattern for your installation, while the simple front access panel

mounting system lets you replace your 3form material designs as often as desired without costly or difficult maintenance.

For more information, please visit 3-form.com or call 800.726.0126

Solution Document

Need help?

Do you have a question about the LightBox and is the answer not in the manual?

Questions and answers

Summary of Contents for 3form LightBox

Page 1 3form LightBox is a pre-configured backlighting solution for signature 3form material. The innovative LED illumination source eliminates hot spots while requiring minimal space between the light source and the 3form material. Offered in a standard square module, 3form LightBox easily configures to any custom pattern for your installation, while the simple front access panel mounting system lets you replace your 3form material designs as often as desired without costly or difficult maintenance.
Page 2 Wiring Diagram for LightBox - 0-10V Dimming 100W-1200W Cleaning and Maintenance Repairing Light Guide Scratches For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 3 Material Compatibility The LightBox is currently configured to work with 3/8" Varia Ecoresin with a supermatte back finish or C3 Vapor back layer for optimum backlighting results. Other 3form material types and gauges may be available and suitable for use with the LightBox.
Page 4 Sizing, Power and Electrical The 3form LightBox can be rotated 90-degrees to fit a horizontal or vertical rotation. The standard size is 4' � 4', but custom sizes are available. The minimum size in either direction is 6 inches; the maximum size of the side without LEDs is 48 inches and the maximum size of the side with the LEDs is 96 inches.
Page 5 Remove Face Panel unpackage LightBox and remove the face panel. The face panel is affixed to the LightBox with 3M Dual Lock tape. The LightBox is shipped with shims behind the face panel to prevent the Dual Lock from engaging. Once the Dual Lock is engaged, it will require prying the face out with a thin flat screwdriver.
Page 6 Isopropyl Alcohol. For additional cleaning instructions and recommendations, please turn to page 7 of this document. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 7 • Recommend all power supplies be mounted in a junction box • 2"+ of air space recommended on sides and above each power supply For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 8 • Recommend all power supplies be mounted in a junction box • 2"+ of air space recommended on sides and above each power supply For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 9 Start about 6" from the corner. with your hand. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 10 If you have a pour container, use a spray bottle adjusted to a fine mist spray. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 11 You will hear or feel a slight click as the Dual-Lock engages. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 12 Begin to polish the sanded area by next using 800 grit sand- when this phase is complete. paper. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 13 Spray the area with water use a hand orbital sander. prior to sanding. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.
Page 14 3M Perfect-It Detailing Cloths specified in the cleaning section of this document. For more information, please visit 3-form.com or call 800.726.0126 JunE 2018 | MAn-020 Backlighting - LightBox | REV 009 © 2018 3form, Inc. All rights reserved.