Material Required; Fig. 39: Swivel Lifting Eyes; Table 38: Swivel Lifting Eyes - ABB HT606750 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
9 Dismantling and fitting, general / 9.2 Material required
9.2

Material required

Customer spare part set
Before starting operations, make sure the required customer spare part set is available (see
chapter Spare parts →178).
Customer tool set
Before starting work, make sure the required tool set is available (see chapter
Not all tools are marked with a part number. Identification is guaranteed by the tool list. This
list is enclosed with the tool set.
WARNING
Servicing the tools
The tools must be checked for damage before and after use.
Visually inspect for corrosion, cracks, deformation and wear.
u
Damaged tools must no longer be used and must be replaced.
u
Swivel lifting eyes
Swivel lifting eyes are required for the safe lifting of loads, which are not supplied by ABB.
Fig. 39: Swivel lifting eyes
Product Thread M
A150 M8
M16
A155 M8
M16
Table 38: Swivel lifting eyes
Press-off screws
Six press-off screws (01) are required to press off the gas outlet flange, which are not sup-
plied by ABB.
© Copyright 2021 ABB. All rights reserved.
Length L [mm]
13 mm
21 mm
13 mm
21 mm
HZTL4032_EN
Minimum load limit [kg]
75 kg
1000 kg
150 kg
1400 kg
Rev.R
Tools →192).
Quantity
3
2
3
2
August 2021