1. Manuals
  2. Brands
  3. Double E Manuals
  4. Toy
  5. E355-003
  6. User manual

Double E E355-003 User Manual

Hide thumbs
1
2

Advertisement

Table of Contents

USER MANUAL
1

Main parameters

Item No.: E355-003
Material: plastic and electronic components
Batteries: Car battery: 1 pc of 3.7V rechargeable battery.
Remote controller battery: two pcs of 1,5V AA batteries.
2

Battery Installation

1. Open the cover of battery case locates in the back of controller, inserts two pcs of 1.5V AA
batteries into the battery case, and then screw the cover (Fig 2A).
2. Please screw out the cover at the back of car by screwdriver, open the cover as the arrow
showed, insert 1 pc of 3. 7V rechargeable battery, then screw the cover (Fig2B).
Notice: This product shall be charged for two to three hours. The supporting USB charger shall not
be used for other devices other than this product.
3

2.4GHz Auto-matching

1.
After installing the batteries of tractor and remote controller, turn on the switch of both. The
indicator of remote controller and the front lights of tractor would be flashing slowly, and then at a
state of auto-matching. When the tractor with a sound of DI-DI, it means the auto-matching is
successful.
2.
One remote controller can only match with one tractor. After the success of matching, there is
non-interference of each tractor.
3.
If the remote controller could not find out the 2.4G signal of the tractor in 1 minute, it would turn
in a sleeping state (light off of the indicator). To press any key to activate.
4.
To remake a pair with other tractor or remote controllers, please turn off the power of both.
4
Installation Diagram
-1-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E355-003 and is the answer not in the manual?

Questions and answers

Summary of Contents for Double E E355-003

  • Page 1 USER MANUAL Main parameters Item No.: E355-003 Material: plastic and electronic components Batteries: Car battery: 1 pc of 3.7V rechargeable battery. Remote controller battery: two pcs of 1,5V AA batteries. Battery Installation 1. Open the cover of battery case locates in the back of controller, inserts two pcs of 1.5V AA batteries into the battery case, and then screw the cover (Fig 2A).
  • Page 2 Basic operation and functions After pairing, switch on the truck by pressing the "On/Off" button. Advanced features 1. Auto-OFF: • After starting, the truck would automatically shut down without receiving any signal in 60 seconds. To reactivate by pressing any keys. 2.

Table of Contents