Advertisement
DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.
8
DO NOT use the fan outdoors.
8
DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.
8
When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof location.
9
NOTE:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
2. INTRODUCTION
High performance stand fan with advanced aerodynamic blades for maximum air movement. Quiet operation and high duarbilty motor.
5-carefully programmed modes which include - Sleep/Calm/Refresh/Cool/Power. Offers quiet oscillation and adjustable fan head allowing
great airflow in any room. Additional features include an 8hr timer, Auto-dimming LED control panel and fully functional remote control and
remote storage. Metal grill and height adjustment up to 1.4m (55"). Ideal for home, bedroom and office environments. Weighted base for extra
stability and easy-to-assemble, tool free.
3. SPECIFICATION
Model No:
Fan Diameter:
Speeds:
Speed Range:
Power:
Supply:
Maximum Flow Rate (F):
Fan Power Input (P):
Service Value (SV):
Standby Power Consumption (Psb):
Seasonal Electrical Consumption (Q):
Fan Sound Power Level (Lwa):
Maximum Air Velocity (c):
4. ASSEMBLY
4.1.
Fix mounting column (fig.1.3) securely to the base (fig.1.2) using the
locking mechanism (fig.1.1).
4.2.
Place the motor assembly (fig.1.5) onto the mounting column (fig.1.3)
and secure in place using the locking ring (fig.1.4).
4.3.
Place the rear grill (fig.1.6) onto the motor housing and align it with the
three raised knobs on motor housing.
4.4.
Secure the grill in place using the mounting nut supplied (fig.1.7).
4.5.
Align the fan blade with the motor drive shaft and secure in place
using the retaining nut (fig.1.8). Tighten the nut in an anticlockwise
direction as it has a left hand thread.
4.6.
Press the front cover onto the rear cover such they clip together.
4.7.
Place the fastening clip (fig.1.9) around the join line of the two covers and tighten
in place using the screw clip at the base of the fan guard.
5. OPERATION
5.1.
Ensure that the fan is switched off before connecting the electrical supply.
5.2.
To turn the fan on, press the power on/off control button (fig.2.1).
5.3.
To select fan speed, press the speed control button (fig.2.2). To cycle through the
5 speed settings, press the button repeatedly.
The selected speed will be illuminated (fig.2.5)
5.4.
To select auto-off time, press the timer button (fig.2.3). Press once for 1 hour,
twice for 2 hours, three times for 4 hours and four times for 8 hours. The selected
time will be illuminated (fig.2.4) The final press will turn off the timer.
5.5.
To engage the oscillation feature, depress the knob (fig.1.11) on the top of the motor
unit. To disengage the feature, raise the knob.
5.6.
The angle of tilt of the fan can be adjusted by loosening the clamp (fig.1.10).
5.7.
The height of the fan can be adjusted by loosening the locking ring (fig.1.4).
5.8.
The remote control requires 3 AAA batteries (not supplied). All functions work identically to the manual controls.
© Jack Sealey Limited
SFF16Q
Ø400mm(16")
5
600/700/800/900/1000rpm
50W
230V~50Hz
57.42 m³/min
41.7W
1.38 (m³/min)/W
0.16W
16.2kWh/a
53dB(A)
2.9m/s
Original Language Version
9
8
7
6
fig.1
4
1
fig.2
SFF16Q
Issue 1
11
5
10
4
3
2
1
`
5
3
2
4/1/22
Advertisement
