Table of Contents Table of Contents ........................................3 Specifications ......................................... 4 Safety ............................................5 General Rules ....................................... 5 Warnings ........................................6 Organizational Measures and Safety................................6 Maintenance and Troubleshooting During Work ............................6 General Information ....................................... 7 Description of Machine ....................................7 Switchbox ........................................
Read the manual carefully to learn equipment applications and limitations, as well as potential hazards associated with this type of equipment. Keep manual near machine at all times. If your manual is lost or damaged, contact National Flooring Equipment (NFE) for a replacement. Personal Maintenance &...
Safety WARNINGS Be aware of warning and cautionary information, designated by a gray text box. These areas will contain information regarding dangers to the operator and/or the machine and instruction to prevent injury. ORGANIZATIONAL MEASURES AND SAFETY Before starting any work with or on the machine, all authorized personnel must read the instruction manual and, in particular, the section regarding safety instructions.
General Information DESCRIPTION OF MACHINE Features: • Rubber handle grip • Clamping grip for height adjustment • Emergency stop button • Clamping grip for work angles • Special tool holder • Rubber wheels: 3.3” x 10.2” (8.4 x 26 cm) •...
Components and Assembly POWER TOOL ASSEMBLY This machine is currently only compatible with the HILTI TE1000 and TE1500 jackhammers. Using a 17 mm wrench and an Allen key, complete the following steps to assemble the power tool to the machine: Unscrew lower tool holder (Figure 1) and upper tool holder (Figures 2-4).
Operation STARTING THE MACHINE Regular inspections are important to prevent breakdowns. Before starting: Check that all machine components have been correctly assembled. Check that all screws and other fasteners are tight. Check that all safety devices are functioning as designed. Check the electrical cords for damage.
Maintenance WARNING: BEFORE BEGINNING ANY REPAIR WORK ON THE MACHINE, MAKE SURE THAT IT IS TURNED OFF AND DISCONNECTED FROM THE POWER SOURCE. MAINTENANCE INFORMATION Breakdowns caused by insufficient and unprofessional maintenance can lead to very high repair costs and long downtimes. Regular mainte- nance is essential.
Parts List and Diagrams Item# Part# Spare Parts Item# Part# Spare Parts Handle upper part Rubber bushing 402838 Rubber grip Washer Threaded rod M12 Hexagon screw Shock-reducer Lead wire 5m 2.5mm2 Star-shaped handle Connection cable 2.5mm2 Rubber plate Housing cpl. for HILTl Hexagon screw Hexagon nut Locking ring...
Page 12
Parts List and Diagrams Item# Part# Spare Parts Item# Part# Spare Parts Hexagon screw Locking ring Locking ring Spacer Spacer 402841 Rubber wheel Bolt Distance washer Support for rubber bush. Spacer Rubber bushing Locking ring Washer Hexagon screw Hexagon screw 403143 Locking ratchet plate Chassis cpl.