Reset Your Smart Spotlight - TP-Link Tapo L610 User Manual

Reset Your Smart Spotlight

There are two types of reset available: a
restore them to factory defaults.
Soft Reset (without losing the configuration settings except Wi-Fi)
1. Turn the light switch controlling the smart spotlight to the on position first.
2. Switch it off and on 3 times, pausing for one second in between.
3. Wait for about 4 seconds and the smart spotlight should blink 3 times, which indicates a successful soft reset.
Factory Reset (back to factory default settings)
Method 1
1. Turn the light switch controlling the smart spotlight to the on position first.
2. Switch it off and on 5 times, pausing for one second in between.
3. Wait for about 4 seconds and the smart spotlight should blink 3 times, which indicates a successful soft reset.
Method 2
On the home page in Tapo app, long press the card and tap
soft reset which resets the Wi-Fi settings only, and a
.
factory reset
OR Go to spotlight's Settings page and tap
that erases all of your custom settings and
REMOVE at the bottom.
17