Display [E01] On Fld With Unrecognized Hdd - Sony RDR-HXD790 Service Manual

4-3. Display [E01] on FLD with unrecognized HDD

E01
Is the HDD free from
abnormal noises?
YES
Is not "#" displayed?
YES
Reconnect the SATA
cable. Does the problem
still occur?
YES
Replace the SATA cable.
Does the problem
still occur?
YES
Replace the HDD with a new
one and perform Factory Check.
Does the problem
still occur?
YES
There may be a problem with the Engine.
Therefore, put the original HDD back in the unit.
Then, follow the procedure to replace the Engine.
After replacing the Engine, perform "Setting the Model Name"
on "Service Note", page 6.
Does the problem
still occur?
YES
Another defect
has occurred.
NO
NO
Unauthorized HDD
NO
Replace the SATA Cable
NO
*
Refer to "Note".
NO
Note: Write down the HDD information on the HDD
NO
Final check
Note: Performing "Final Check" will not erase the HDD data.
1-4
Replace the HDD
Note: Write down the HDD information on the HDD
return sheet before replacing the HDD.
Note the information on pages 6-6, 6-7, 6-9,
and 6-10 of Chapter 6, "SERVICE MODE".
For information about replacing the HDD, see
page 2-5 of Chapter 2, "DISASSEMBLY".
After replacing the HDD, perform
"Factory Check" on "SERVICE NOTE"
, page 1-6.
When performing "Factory Check", the data
saved to the HDD by the customer is erased.
Obtain customer consent before performing
"Factory Check".
return sheet before replacing the Engine.
For information about replacing the Engine,
see page 2-4 of Chapter 2, "DISASSEMBLY".
When performing "Factory Check", the data
saved to the HDD by the customer is erased.
Obtain customer consent before performing
"Factory Check".
*
Refer to "Note".
END