Summary of Contents for DEVA GEPARD PREMIUM-CZ
- Page 1 04/2021 Firefighter protective clothing GEPARD Type No: 629-2000 3rd category of Personal Protective Clothing...
- Page 2 PREMIUM design:...
- Page 3 PREMIUM design:...
- Page 4 Description of used materials and their technical parameters: Construction No. 1 • Outer shell material: GLADIATEUR VFL, 240g/m2 (93% meta aramid /5% para aramid / 2% antistat. fibre) Finish: SOFIGUARD® Performance Colour: : Blue, Red, Wet Sand, Yellow • Membrane: Fireblocker N 2L, 140 g/m2 (face –...
- Page 5 Additional material: • Anti wicking barrier: FR FABRIC 107 529 • Reinforcement: F1312 Bl-Si - AS 100% kevlar® • Padding: mikrop. ADI-CR - neoprene • Sewing: N-tech CS 70 • Velcro: STAP, VELCRO, YKK • Zipper: MGOR-106 YKK • Cuff: 7115/2&2 –...
- Page 6 Clothing impregnation: • Top material is equipped by a sufficient impregnation Sofiguard Performance® that secures protection against water and chemicals. The producer of the material guarantees min. 25 cycles before additional re-impregnation when the laundering instructions are followed. • Impregnation efficiency in real conditions may differ from the measured laboratory results and is influenced by several factors.
- Page 7 2 – higher level of technical use (fire fighting in closed place) EU – Declaration of conformity: www.deva-fm.cz/ - products-instruction Maintenance of intervention clothing • Maintain intervention clothing only in professional laundries or equipment supplied by a professional manufacturer of washing and drying machines in your own departments.
- Page 8 Decontamination It is a set of methods, procedures and means for an effective removal of contaminants. It is necessary especially if the level of contamination exceeds the usual level of contamination and when it is not possible the garment safely clean and disinfect. An integral part of the overall maintenance of the firefighter clothing is their disinfection.
- Page 9 Maintenance: • Maximum wash temperature set at 60 °C with reduced mechanical action • We recommend delicate washing at 40 °C. Temperature of 40°C is suitable as well for very dirty clothing. • All closures (zippers, press buttons, velcros, buttons, carabines) must be properly closed to avoid abrasion •...
- Page 10 Iron at maximal temperature 110 °C, carefully with steam. No bleaching is allowed. The clothing may be dry-cleaned using tetrachloroethylene, monofluortrichlormethane, and all solvents specified under the F symbol. The common cleaning procedures have no restriction. Professional wet cleaning. Ordinary cleaning procedures. Finally we would like to draw your attention to a fact that GLADIATEUR®material is as other chemical materials sensitive to direct daylight.
- Page 11 Clothing service life Duration of the protective clothing using is not fixed. Wearing off, devaluation, eventually loss of protective features can occur due to several factors: ▪ wearing off during work activities ▪ not adhering to manufacturer´s maintenance instructions ▪ irregular maintenance including repair service ▪...
- Page 12 Instructions for users: 469: 2020 • In compliance with EN 469 requirements, the lower and upper body parts, including a neck, arms to wrists, and legs to ankles are protected and covered by the clothing; however, the other body parts are not protected and other equipment items are necessary to achieve the complete protection.
Need help?
Do you have a question about the GEPARD PREMIUM-CZ and is the answer not in the manual?
Questions and answers