Technologic Systems TS-5400 User Manual page 14

TS-5400 User's Manual
WATTCP.CFG configuration file
my_ip=192.168.0.20
hostname="epc.embeddedx86.com"
netmask=255.255.255.0
gateway=192.168.0.1
nameserver=192.168.0.1
With the WATTCP.CFG file properly setup and the 10/100 base-T cable connected, you should be able
to ping other nodes on the network.
Ping example:
[A:\]ping www.embeddedx86.com
Technologic Systems Example Configuration
Pinging 'www.embeddedx86.com' [209.130.84.83]
sent PING # 1 , PING receipt # 1 : response time 0.00 seconds
Ping Statistics
Sent
Received
Success
Average RTT : 0.35 seconds
[A:\]
Other WATTCP examples include: serial to telnet redirector, http file download, telnet server, and finger.
Many more can be downloaded from the internet as freeware.
DOS TCP/IP configuration – MS Client for DOS
The Davicom Ethernet adapter has the MS Client for DOS driver available. This has been tested and
found to work on Windows workgroups as well as Samba workgroups. Check the Technologic Systems
web page for driver downloads (www.embeddedx86.com). Email
questions.
// IP address of this Ethernet interface.
// Host name of this computer.
// Used to determine which IP's are local.
// Gateway for internet access.
// Name server for domain name lookups
: 1
: 1
: 100 %
13
Technologic Systems
support@embeddedx86.com
.
with
10/31/03