DeLonghi DDX2 Series Instructions For Use Manual page 7

MODE SELECTION
1) Plug the appliance into a an outlet.
2) the display will show "-- --" to indicate that the appliance
is in stand-by and ready for use.
If the display shows "
or the tank is incorrectly positioned
3) Press the ON/Stand-by
Dehumidifying Mode
The display will show on the left side the room humidity level
(ex.: 63) and on the right side the display will show the de-
gree of humidity you want to reach (ex.: 58
Press the "+" or "-" button to set the desired humidity level
(30% means a dry environment, 80% a humid environment).
Press the " " to select the fan speed (MIN/MAX). If you select
MAX, the appliance will operate to the maximum speed. If you
select MIN, the appliance will operate to the minimum seed.
and the noise levels will be reduced.
Press button " " to display the Temperature on the LCD dis-
play. On the left side the display will show first the °F and then
the temperature in °C.
After few seconds, the display will automatically show the hu-
midity level.
When the appliance reaches the humidity set point the appli-
ance will automatically stop working but the fan will work at
the minimum speed.
As soon as the humidity increases above the set point, the ap-
pliance will automatically resume dehumidification operation.
Continuous Dehumidifying Function
In order to operate the continuous dehumidifying function press
button "-" until the display will show "--".
With this function the appliance will operate continuosly.
" it's necessary to empty the tank
button.
).
TIMER
How to program the delayed start
function (From the OFF Position)
1) With the unit in the stand-by position, press the
button. On the right side the display will show
the number of hours after which the appliance will start
operating.
2) Use the + and - button to set the desired hours. Wait a few
seconds to set the set appliance. The symbol
remaining time will remain on the display.
3) When the selected time is reached, the appliance will start
working.
How to program the delayed start
function (From the ON Position)
1) With the unit in the ON position, press the
the right side the display will show
hours after which the appliance will stop operating.
2) Use the + and - button to set the desired hours. Wait a few
seconds to set the appliance.
The symbol and the remaining time will remain on the
display.
3) When the selected time is reached, the appliance will stop
working.
How to modify or disactivate the timer
If you wish to modify the set value, press once the timer button
and press then buttons + and -.
If you wish to disactivate the timer, press the timer button twice.
Note:
When switching the appliance on or when the
electricity is restored, the appliance will start working on the
previously selected mode.
7
and
and the
button. On
and the number of