Network - HP Vectra XE310 Technical Reference Manual

Network

HP 10/100 BT PCI Ethernet Adapter
LAN Interface
Power Management
Manageability
Diagnostics
Drivers
Network Interface
Physical Dimensions
Boot on LAN
XE310
The HP
program. For more information, refer to "Using the HP Setup Program" on page 20.
LAN connector
The 10/100BT connector is located on the rear of the HP XE310 PC
10/100BT LAN
connector
For more information on network technology, refer to the Technical Reference Manual - Business PC
Technology.
HP 10/100 BT PCI Ethernet Adapter Features
• 32 bits PCI 10/100 BT
• RJ 45 LAN port
• RWU for ACPI Windows 98, Windows 98 SE, Windows 2000, Windows XP
• On Now 1.0; APM 1.2; ACPI 1.0
• PCI 2.2
• DMI 2.0 Component Code
• WfM 2.0
• PXE 2.0 BootROM
• Production Diag
• MAC address DOS report tool
Windows 95, Windows 98, Windows 2000, Windows NT 4.0, MS-DOS, Novell, Windows PX (embedded)
10 Mbps Ethernet 10BASE-T: Ethernet IEEE 802.3 industry standard for a 10 Mbps baseband CSMA/CD
•
local area network.
100 Mbps Ethernet 100BASE-TX: Ethernet IEEE 802.3u industry standard for a 100 Mbps baseband
•
CSMA/CD local area network.
Height: 5.3 cm (2.11 in.)
•
• Length: 12 cm (4.72 in.)
PC can boot on LAN. However, this feature is disabled by default in the BIOS Setup
Specifications
LEDs
System Features
.
17