Introduction; Product Description; Why Do I Need An Operator's Manual - Venture Products Ventrac LM440 Operator's Manual & Parts Drawings

Finish mower

Table of Contents

The LM440 mower is designed for the sole purpose of finish mowing and is built to give you maximum

performance and productivity. A rugged all steel reinforced carrier frame incorporates a full length rear roller

that maximizes grass striping of this ground floating deck.

The LM440 features a 44 inch (112 cm) cutting width. Ventrac's LAS (Linear Adjustment System) provides

ten cutting height positions ranging from 1-1/2" (38 mm) to 3-3/4" (95 mm). A single hand adjustment lever

allows for a quick change in cutting height selection. A slide release allows the handle to be returned to

deck level, preventing it from catching on low branches and shrubs.

With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical posi-

tion for cleaning, maintenance, or storage.

This manual has been created to help you gain the important knowledge of what is needed to safely

operate, maintain, and service your machine. It is divided into sections for convenient reference of the

appropriate section.

You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-

ing the operator's manual will help you become familiar with each specific piece of equipment. Under-

standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the

equipment. Keep this manual with the machine at all times. The manual should remain with the machine

even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-

tact your local Ventrac dealer for a replacement.

When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both

the power unit and the attachment being used to ensure the safest operation possible.

The information in this manual provides the operator with the safest procedures to operate the machine

while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual

may result in personal injury and/or damage to the equipment.

INTRODUCTION

enture Products Inc. is pleased to provide you with your new

Ventrac mower! We hope that Ventrac equipment will provide

you with a ONE Tractor Solution.

Introduction - 5

Table of Contents