Before You Start - Royalcraft Faro Assembly Instructions

Warnings
IMPORTANT, RETAIN FOR FUTURE
REFERENCE
READ CAREFULLY
See enclosed instructions for safety and care
information.
Failure to follow the warnings could result in serious
injury.
Handle heavy parts with care.
This product is intended for Domestic Use only.
This product should only be used on firm, level
ground.
Ensure the product is always placed on level
ground.
Furniture can be dangerous if used incorrectly or
maintained poorly. Keep your furniture in a good
condition at all times. No liability will be accepted for
damage or injury caused by failure to follow the care
and maintenance guidelines.
Dos
Unwrap all packaging materials and place the
components on suitable surface to prevent
scratching your product.
We recommend the use of furniture covers to
protect your product when not in use.
Cushions should be cleaned following the care
instruction on the label.
If the set is stored outside then we recommend that
cushions are brought inside for storage and
protection.
To clean the product, a pressure washer or jet wash
on a wide spray can be used at a minimum distance
of 1m from the product. Do not aim this directly at
the joints of the furniture. Alternatively it can simply
be wiped down by hand with a damp sponge and a
weak solution of soap and water.
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd.
Faro Sunlounger with Cushion
Assembly Instructions

Before you start

We would recommend lifting the products to move
the items instead of dragging them which may
cause some damage to either the product or the
area in which you choose to use them.
Don'ts
Never drag furniture when moving it, always lift it.
Never tilt the product use.
Do not stand or climb onto the product.
Do not sit or lean onto the arms/rims of this product.
Never use scourers, abrasives or chemical cleaner.
Number of people required for assembly
Two people
Time to assemble
10 Minutes
Tools required
(Rubber Hammer may be required, not provided)
www.royalcraft.co.uk
2 / 5